Loading ...
Loading ...
Dryer Description
e TIMER knob sets the drying time: rotate it clockwise, NEVER
COUNTER-CLOCKWISE, until the indictor is pointing to the drying
time you want to select.
CHOOSING A PROGRAMME
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type.
3. Open the door and make sure the lter is clean and in place.
4. Load the machine and make sure items are not in the way of the door
seal. Close door.
5. Set the temperature with the HEAT button. High heat for Cotton
and synthetics. Low heat for delicates and acrylics.
6. Select a drying time by rotating the TIMER knob clockwise.
e tables below show APPROXIMATE drying times in minutes.
Weights refer to dry garment weights.
7. Press the START button to begin. During the drying programme,
you can check on your laundry and take out items that are dry while
others continue drying. When you close the door again press the
START button in order to resume drying.
8. About 10 minutes before the programme is completed it enters the
nal COOL TUMBLE phase (fabrics are cooled) which should always
be allowed to complete.
9. Open the door, take the laundry out, clean the lter and
replace it.
10. Unplug the dryer.
Control panel
Standard Cotton - High (full) Heat
isis the most ecient program in terms of energy consumption
(EU 392/2012). To reach maximum eciency, select the highest
temperature option.
Drying times 800-1000rpm spin in washing machine
1-2kg 3-4kg 5-6kg
20-45mins 45-70mins 70-100mins
Synthetics - High (full) Heat
Drying times on reduced spin in washing machine
1kg 2kg 3kg
20-30mins 35-45mins 45-60mins
Acrylics - Low (gentle) Heat
Drying times 800-1000rpm spin in washing machine
1kg 2kg
25-40mins 40-60mins
Laundry
Natural bres: 6kg max Synthetic bre: 3kg max
WASH CARE LABELS
Look at the labels on your garments when tumble drying. e following
symbols are the most common.
May be tumble dried
Do NOT tumble dry
Tumble dry at high heat setting
Tumble dry at low heat setting
Cleaning the lter aer
each cycle
20
30
40
50
60
70
80
100
110
120
130
0
TIMER
Knob
Indicator
HEAT
Button
START
Button
e HEAT button selects drying temperature.
OUT: LOW heat IN: HIGH heat.
e TIMER knob:: the 0 position swithes o the dryer.
Clean the lter once drying is
completed.
Step 1
Open the door of your dryer
Step 2
Pull out the lter (using the two
nger grips)
Step 3
Clean the u o the lter and
replace it correctly.
Ensure that the lter is pushed
fully home.
Step 4
Make sure the lter is pushed fully home.
NEVER run the dryer without the lter in position.
Failure to clean the lter aer EVERY drying cycle
will aect the drying performance of your machine.
It will take longer to dry and as a result will use more
electricity during drying.
At least every two or three months you MUST clean
u build up around the lter housing and the vent
tube.
Check the vent tube and any permanent venting
xture to make sure that there has been no
accumulation of u or lint. Remove lint that
collects around the lter and the outlet vents.
Loading ...