User Manual KitchenAid MGT8775XB cooking

KitchenAid MGT8775XB cooking - Use Manual - Use Guide PDF.
Documents: Go to donwload!
User Manual
  • Owner's manual - (English)
Other Documents
  • Dimension Guide - (English)
  • warranty-W10430935-W.pdf - (English)
  • Installation Instructions - (English)
  • Installation Instructions - (English)



RANGE SAFETY

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is. tell you how to reduce the chance of injury. and tell you what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly. a fire or explosion may result causing property damage. personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

• If you cannot reach your gas supplier. call the fire department.

– Installation and service must be performed by a qualified installer. service agency or the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information. contact your gas supplier.

If a gas leak is detected. follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

The Anti-Tip Bracket

The range will not tip during normal use. However. the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip Bracket

Range Foot

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire. electrical shock. injury to persons. or damage when using the range. follow basic precautions. including the following:

■ WARNING: TO REDUCE THE RISK OF TIPPING OF THE RANGE. THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY. SLIDE RANGE FORWARD. LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR OR WALL. AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

■ WARNING: NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the oven.

■ WARNING: NEVER cover any slots. holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning.

Aluminum foil linings may also trap heat. causing a fire hazard.

■ CAUTION: Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.

■ Proper Installation – The range. when installed. must be electrically grounded in accordance with local codes or. in the absence of local codes. with the National Electrical Code. ANSI/NFPA 70. In Canada. the range must be electrically grounded in accordance with Canadian Electrical Code. Be sure the range is properly installed and grounded by a qualified technician.

■ This range is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

■ Disconnect power before servicing.

■ Injuries may result from the misuse of appliance doors or drawers such as stepping. leaning. or sitting on the doors or drawers.

■ Maintenance – Keep range area clear and free from combustible materials. gasoline. and other flammable vapors and liquids.

■ Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.

■ Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■ Before Self-Cleaning the Oven – Remove broiler pan and other utensils. Wipe off all excessive spillage before initiating the cleaning cycle.

COOKTOP USE

Cooktop Controls

IMPORTANT: Your range is factory-set for use with Natural gas. If you wish to use LP gas. an LP Gas Conversion Kit is included with your new range. See the “Gas Conversions” section of the Installation Instructions for details on making this conversion.

Electric igniters automatically light the surface burners when control knobs are turned to LIGHT.

The large burners (16. 00. 15. 00 and 12. 00 Btu/h [British Thermal Units]) provide the highest heat setting. and are ideal for cooking large quantities of food or liquid. using large pots and pans. The small burners (9. 00 and 5. 00 Btu/h) allow more accurate simmer control at the lowest setting. and are ideal for cooking smaller quantities of food. using smaller pots and pans.

Before setting a control knob. place filled cookware on the grate.

Do not operate a burner while using empty cookware or without any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does not ignite. listen for a clicking sound. If you do not hear the igniter click. turn the burner off. Check for a tripped circuit breaker or blown household fuse.

Check that the control knob is pressed completely down on the valve shaft. If the spark igniter still does not operate. call a trained repair specialist.

To Set:

Push in and turn knob counterclockwise to LIGHT.

All the surface burners will click. Only the burner with the control knob turned to LIGHT will produce a flame.

Turn knob anywhere between HI and LO. Use the following chart as a guide when setting heat levels.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

A. Left front control knob B. Left rear control knob C. Center burner (on some models) D. Right rear control knob E. Right front control knob

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

LIGHT Light the burner.

HI Start food cooking.

Bring liquid to a boil.

MED (Medium) Hold a rapid boil.

Quickly brown or sear food.

Fry or sauté foods.

Cook soups. sauces and gravies.

Stew or steam foods.

LO Keep food warm.

Simmer.

A. Burner cap B. Burner base C. Alignment pins D. Igniter E. Gas tube opening

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle. the entire cooktop area may become hot.

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills. food. cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size and shape as shown in the previous illustration. A good flame is blue in color. not yellow. Keep this area free of soil and do not allow spills. food. cleaning agents or any other material to enter the burner ports.

To Clean: IMPORTANT: Before cleaning. make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners. bleach or rust removers.

Remove the burner cap from the burner base and clean according to “General Cleaning” section.

Clean the gas tube opening with a damp cloth.

Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted. contact a trained repair specialist.

Replace the burner cap. making sure the alignment pins are properly aligned with the burner cap.

Turn on the burner. If the burner does not light. check cap alignment. If the burner still does not light. do not service the sealed burner yourself. Contact a trained repair specialist.

Griddle Accessory (on some models)

Turn off the cooktop burners and allow the grates to cool.

Place griddle on center grate with the grease trap toward the cooktop controls.

The locating tabs on the bottom side of the griddle at the grease trap end should be placed over the grate fingers closest to the electronic control.

The notch of the griddle should fit over the center support of the grate.

NOTE: When properly installed. the bottom of the griddle will rest securely just above the top surface of the grate.

IMPORTANT: Do not allow griddle to overhang controls.

To Use: IMPORTANT: To avoid damaging the griddle. the griddle is to be used on the center burner on Low to Medium heat only.

The griddle is intended for direct food cooking. To avoid damaging the finish of the griddle. do not use pans or metal utensils on the griddle.

To avoid damaging the nonstick finish. do not use nonstick cooking sprays.

A. 1-1¹⁄₂" (25-38 mm) B. Burner ports

A. Incorrect B. Correct

A. Cooktop controls B. Grease trap C. Center of grate

A. Grate fingers closest to controls B. Center support of grate C. Notch D. Locating tabs

Home Canning

When canning for long periods. alternate the use of surface burners between batches. This allows time for the most recently used areas to cool.

Center the canner on the grate above the burner.

Do not place canner on 2 surface burners at the same time.

For more information. contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area. element or surface burner.

Ideal cookware should have a flat bottom. straight sides and a well-fitting lid. and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware. However. when used as a base they can leave permanent marks on the grates.

Cookware material is a factor in how quickly and evenly heat is transferred. which affects cooking results. A nonstick finish has the same characteristics as its base material. For example. aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

Use the following chart as a guide for cookware material characteristics.

ELECTRONIC OVEN CONTROLS

This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and appearances of the items shown here may not match those of your model.

COOKWARE CHARACTERISTICS

Aluminum Heats quickly and evenly.

Suitable for all types of cooking.

Medium or heavy thickness is best for most cooking tasks.

Cast iron Heats slowly and evenly.

Good for browning and frying.

Maintains heat for slow cooking.

Ceramic or Ceramic glass Follow manufacturer’s instructions.

Heats slowly. but unevenly.

Ideal results on low to medium heat settings.

Copper Heats very quickly and evenly.

Earthenware Follow manufacturer’s instructions.

Use on low heat settings.

Porcelain enamel-on steel or cast iron

See stainless steel or cast iron.

Stainless steel Heats quickly. but unevenly.

A core or base of aluminum or copper on stainless steel provides even heating.

A. Upper oven settings B. Oven display C. Cook time D. Delay start E. Favorite setting

F. Self clean G. Settings H. Oven light I. Clock J. Kitchen timer on/off

K. Lower oven cancel L. Upper oven cancel M. Start N. Temp/time “up” and “down” pads O. Lower oven settings

Display

When power is first supplied to the range. or if a power failure has occurred. “12:00” will appear on the display. See “Clock” in the “Settings” section to set time of day.

When the oven is not in use. the display shows the time of day.

Cancel

The Cancel pads stop any function except the Clock. Timer and Control Lock.

Oven Lights

While the oven doors are closed. press OVEN LIGHT to turn the lights on and off. Both oven lights will come on when either door is open. The oven lights will not come on during the Self-Clean cycle.

Kitchen Timer

The Kitchen Timer can be set in hours or minutes up to 9 hours and 59 minutes. and counts down the set time. The Kitchen Timer does not start or stop the oven.

To Set:

Press KITCHEN TIMER. “Set TIMER” will scroll down the upper text display area. and the clock will display “--:--” with the colon flashing.

Press the Temp/Time “+” or “-” pads until the desired time is reached. “Press TIMER” will scroll down the upper text display area.

Press KITCHEN TIMER to start the timer. The colon stops flashing. and the time begins counting down. “TIMER STARTED” will scroll down the upper text display area.

The last minute of the timer countdown will be displayed in seconds.

At the end of the set time. one long beep will sound. and “TIMER End” will be displayed.

Press KITCHEN TIMER to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is canceled.

To Cancel: Press KITCHEN TIMER.

Settings

Settings enables you to personalize audible tones and oven operation to suit your needs. After completing your adjustments. press a CANCEL key or wait 30 seconds for the display to show the time of day.

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit. but can be changed to Celsius.

Press SETTINGS once. “TEMP UNIT” will appear in the upper text area while “FAHRENHEIT. Press (+) for Celsius” will scroll twice from right to left in the lower text area.

Press the Temp/Time “+” pad to change the temperature unit setting. “CELSIUS. Press (+) for Fahrenheit” will scroll twice from right to left in the lower text area. “CELSIUS Selected” will scroll twice from right to left in the lower text area. The temperature units have been changed.

Tones

Tones are audible signals. indicating the following: Basic Functions One tone

Valid pad press

End of Kitchen Timer (long tone)

Function has been entered

Oven is preheated

Three tones

Invalid pad press

Four tones

End of cycle

Adjusting Sound On or Off The oven sound is factory preset for On but can be changed to Off.

Press SETTINGS twice until “SOUND” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn the sound Off. “OFF.

Press (+) for ON” will scroll twice from right to left in the lower text area. “OFF Selected” will scroll twice from right to left in the lower text area. The sound has now been turned off.

Adjusting Sound Volume The oven sound is factory preset for High but can be changed to Low.

Press SETTINGS 3 times until “SOUND VOLUME” appears in the text area and “HIGH. Press (+) for LOW” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn the sound Low. “LOW.

Press (+) for HIGH” scrolls twice from right to left in the lower text area. “Low Selected” scrolls twice from right to left in the lower text area. The sound volume has now been changed.

Adjusting End Tone On or Off The end tone is factory preset for On but can be changed to Off.

Press SETTINGS four times until “END TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn the end tone Off. “OFF.

Press (+) for ON” will scroll twice in the lower text area. “OFF Selected” will scroll twice from right to left in the lower text area. The end tone has now been turned off.

Adjusting Keypress Tone On or Off The keypress tone is factory preset for On but can be changed to Off.

Press SETTINGS five times until “KEYPRESS TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn the keypress tone Off. “OFF. Press (+) for ON” will scroll twice in the lower text area. “OFF Selected” will scroll twice from right to left in the lower text area. The keypress tone has now been turned off.

Adjusting Reminder Tone On or Off The reminder tone is factory preset for On but can be changed to Off.

Press SETTINGS six times until “REMINDER TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn the reminder tone Off. “OFF. Press (+) for ON” will scroll twice in the lower text area. “OFF Selected” will scroll twice from right to left in the lower text area. The reminder tone has now been turned off.

Clock

The clock can be set to display time in a 12-hour or 24-hour format.

The clock is factory preset at the factory for the 12-hour format.

To Change the Clock to 24-Hour Format:

Press SETTINGS seven times until “12/24 HOUR” appears in the upper text area and “12 HR. Press (+) for 24 Hr” appears in the lower text area.

Press the Temp/Time “+” pad once to select 24 hour and again to select 12 hour.

Wait 30 seconds or press CANCEL to accept the setting.

To Set the Clock: Before setting. make sure the oven and Kitchen Timer are off.

Press CLOCK. “Set Time” will appear in the upper text area.

Press the Temp/Time “+” or “-” pads until the desired time is displayed. “Press CLOCK” will appear in the upper text area and “or Push START” will appear in the lower text area.

Press CLOCK or START. “Time Set” will appear in the upper text area. Once it disappears. the time is set.

Sabbath Mode

Sabbath Mode configures the range to conform to Star-K Jewish Sabbath requirements for a Bake cycle. including Timed Bake or Delayed Bake functions. Refer to the “Sabbath Mode” section for a full description of this feature.

12-Hour Auto Off

The oven control is set to automatically shut off the oven 12 hours after the oven turns on. This will not interfere with any timed or delayed cook function.

To Cancel 12-Hour Auto Off:

Press SETTINGS nine times until “12 Hr AUTOOFF” appears in the upper text area and “ON. Press (+) for Off” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to turn off the 12-hour Auto Off feature. “OFF. Press (+) for ON” will scroll twice from right to left in the lower text area.

“OFF Selected” will scroll twice from right to left in the lower text area. The feature has been turned off.

Language

The Language is factory preset to English but can be changed to French.

To Change the Language to French:

Press SETTINGS 10 times until “LANGUAGE” appears in the upper text area and “ENGLISH. Press (+) for French” scrolls twice from right to left in the lower text area.

Press the Temp/Time “+” pad to select French. “FRENCH. Press (+) for English” will scroll. in French. twice from right to left in the lower text area.

“FRENCH Selected” will scroll. in French. twice from right to left in the lower text area.

The language displayed will now be French.

Oven Temperature Control

The oven provides accurate temperatures; however. it may cook faster or slower than your previous oven. so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.

Temperature adjustment applies to upper or lower ovens.

A minus sign means the oven will be cooler by the displayed amount. The absence of a minus sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.

To Adjust Oven Temperature Calibration:

Press SETTINGS 11 times until “TEMP CALIB” appears in the upper text area and “UPPER CALIBRATE. Press (+) for Lower calibrate or push START” scrolls twice from right to left in the lower text area.

Press START to calibrate the upper oven. “UPPER Calibrate selected” will scroll twice from right to left in the lower text area. “UPPER Calib” is shown in the upper text area and “Press (+) or (-) to set offset” scrolls twice from right to left in the lower text area.

OR

Press “+” to calibrate the lower oven. “LOWER Calibrate selected” scrolls twice in the lower text area. “LOWER Calib” is shown in the upper text area and “Press (+) or (-) to set offset” scrolls twice in the lower text area.

Press the Temp/Time “+” pad to increase or decrease the temperature in 5°F (3°C) increments. The adjustment can be set between 30°F (17°C) and -30°F (-17°C).

Press START to set the adjustment and exit the Temperature Calibration menu.

Control Lockout

The control can be locked out to avoid unintended use of the oven.

The control cannot be locked if the oven is in use. or the oven temperature is 400°F (205°C) or above.

The current time of day will remain in the display when the control is locked.

To Lock Control:

Press and hold START for 3 seconds or until “CONTROL LOCKED” appears in the display. “Control locked” scrolls while the control is locking. then “LOCKED” is displayed. “LOCKED” remains lit in the display.

To Unlock Control: Press and hold START for 3 seconds or until “Press and hold START” scrolls in the display.

“UNLOCKING” appears in the display while the control is unlocking. The time of day appears and remains in the display.

ADJUSTMENT °F (ADJUSTMENT °C) COOKS FOOD

10°F (6°C) a little more

20°F (12°C) moderately more

30°F (17°C) much more

10°F (-6°C) a little less

20°F (-12°C) moderately less

30°F (-17°C) much less

OVEN USE

Odors and smoke are normal when the oven is used the first few times. or when it is heavily soiled.

Preheat is recommended for cooking most foods. Food should be placed in the oven when the preheat beep occurs. Some modes use elaborate cycling to achieve best performance. If the oven temperature is increased after the oven is preheated. make sure the oven is preheated to the new temperature before food is put into the oven. If food is in the oven during preheat. it may become overcooked.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom finish. do not line the oven bottom with any type of foil. liner or cookware.

For best cooking results. do not cover entire rack with foil because air must be able to move freely.

To catch spills. place foil on rack below dish. Make sure foil is at least ¹⁄₂" (1.3 cm) larger than the dish and that it is turned up at the edges.

Positioning Racks and Bakeware IMPORTANT: To avoid permanent damage to the porcelain finish. do not place food or bakeware directly on the oven door or bottom.

Racks

Position racks before turning on the oven.

Do not position racks with bakeware on them.

Make sure racks are level.

The upper oven is equipped with 1 flat rack.

The lower oven is equipped with 2 flat racks.

Place food so it will not rise into the broil burner. Allow at least ¹⁄₂" (1.3 cm) between pans and the broil burner.

To Remove Oven Racks: Flat Racks: Pull rack out to the stop position. raise the front edge. and then lift out.

To Replace Oven Racks: Place rack on the rack support in the oven. Tilt the front edge up slightly. and slide rack back until it clears the stop position. Lower front and slide back into the oven.

Rack Positions - Upper Oven

Baking

Broiling

Rack Positions - Lower Oven

Traditional Cooking

Multiple Rack Cooking 2-rack: Use rack positions 2 and 4. or 2 and 5. or 3 and 5.

Baking Layer Cakes on 2 Racks For best results when baking cakes on 2 racks. use rack positions 2 and 4. Place the cakes on the racks as shown.

If oven has been converted for use with LP gas. use rack positions 3 and 5. Place cakes on racks as shown.

FOOD RACK POSITION

Large dishes. frozen meals. sheet cakes. biscuits

Cookies. pizzas

FOOD RACK POSITION

Broiling

FOOD RACK POSITION

Large roasts. turkeys. angel food. bundt and tube cakes. quick breads. pies 1 or 2

Yeast breads. casseroles. meat and poultry and 2-rack baking

Cookies. biscuits. muffins. cakes.

1-rack baking 2 or 3

2-rack baking 3 and 5. or 2 and 4. or 2 and 5

Convection Cooking (on some models)

BAKEWARE To cook food evenly. hot air must be able to circulate. Allow 2" (5.0 cm) of space around bakeware and oven walls. Use the following chart as a guide.

Bakeware

The bakeware material affects cooking results. Follow manufacturer’s recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide.

Meat Thermometer

A meat thermometer is not supplied with this appliance. Follow manufacturer's directions for using a meat thermometer. On models without a temperature probe. use a meat thermometer to determine whether meat. poultry and fish are cooked to the desired degree of doneness. The internal temperature. not appearance. should be used to determine doneness.

Oven Vents

The oven vents release hot air and moisture from the ovens. and should not be blocked or covered. Blocking or covering the vents will cause poor air circulation. affecting cooking and cleaning results. Do not set plastics. paper or other items that could melt or burn near the oven vents.

Baking

Before baking. position racks according to the “Positioning Racks and Bakeware” section.

If only one oven is to be used. that oven will preheat more quickly.

Allow at least ½" (1.3 cm) between the baking pan or casserole and the top burner in the upper oven. Loaf. angel food or bundt pans are not recommended in the upper oven.

When preheating with a baking/pizza stone inside the upper oven. do not set oven above 400°F (205°C). To use baking/ pizza stones at temperatures above 400°F (205°C) in the upper oven. put stone in after the preheat beep.

On some models the convection fan may operate during preheating or during the bake cycle.

To Bake:

Press the BAKE keypad for desired oven. “BAKE” will scroll in the upper or lower text area (depending on oven selection). and 350°F (175°C) will be displayed.

After 3 seconds. “Set temp or” will scroll in the selected oven text area. followed by “Push START.”

Press the Temp/Time “+” or “-” pads until the desired temperature is displayed.

NOTE: The temperature may be changed at any time by pressing the Temp/Time “+” or “-” pads until the desired temperature is displayed and then START. Changing the temperature once food is placed in the oven could affect the performance.

(Optional) If a Set Cooking Time is desired. press COOK TIME. Press the Temp/Time “+” or “-” pads to adjust the cook time by 1-minute increments until the desired time is displayed. “Push START” will scroll in the selected oven text area.

FUNCTION NUMBER OF RACKS USED RACK POSITION(S)

Convection baking or roasting 1. 2 or 3

Convection baking 2 and 4

NUMBER OF PAN(S) POSITION ON RACK

Center of rack.

Side by side or slightly staggered.

3 or 4 Opposite corners on each rack. Make sure that no bakeware piece is directly over another. See “Baking Layer Cakes on 2 Racks” in the “Oven Use” section.

BAKEWARE/ RESULTS RECOMMENDATIONS

Light colored aluminum

Light golden crusts

Even browning

Use temperature and time recommended in recipe.

Dark aluminum and other bakeware with dark. dull and/or nonstick finish

Brown. crisp crusts

May need to reduce baking temperatures slightly.

Use suggested baking time.

For pies. breads and casseroles. use temperature recommended in recipe.

Place rack in center of oven.

Insulated cookie sheets or baking pans

Little or no bottom browning

Place in the bottom third of oven.

May need to increase baking time.

Stainless steel

Light. golden crusts

Uneven browning

May need to increase baking time.

Stoneware/Baking stone

Crisp crusts

Follow manufacturer’s instructions.

Ovenproof glassware. ceramic glass or ceramic

Brown. crisp crusts

May need to reduce baking temperatures slightly.

A. Lower oven vent B. Upper oven vent

Press START.

If the upper oven is used “Preheating” will appear in the upper oven text area. If the lower oven is used. depending on the selection. “Rapid preheating for single rack. Press START to preheat for multi rack baking.” will appear. If no change is made. “Preheating for single rack baking” will appear in the display.

If multi-rack baking is desired. the “START” pad should be pressed and “Standard preheat for multi rack baking. Press START to preheat for single rack baking.” will appear in the display followed by “Preheating for multi rack baking.”

“Rapid preheating for single rack baking” will scroll in the selected oven text area. “Preheating” remains in the text area until the set temperature is reached. When the preheat cycle is complete. “Preheat done insert food for one rack baking only” will scroll twice in the selected oven text area.

When the preheat cycle is complete. insert food. “Insert food for one rack baking” or “Insert food for multi rack baking” will appear in the selected oven text area. “Bake” will scroll in the selected oven text area until CANCEL for the selected oven is pressed.

Place food in the oven when the preheat tone is given.

Press UPPER or LOWER CANCEL when finished.

Remove food from the oven.

Broiling

Broiling uses direct radiant heat to cook food. The lower the temperature. the slower the cooking. Thicker cuts and unevenly shaped pieces of meat. fish and poultry may cook better at lower broiling temperatures.

For best results. use a broiler pan and grid. They are designed to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan. one may be ordered. See “Assistance or Service” section to order.

For proper draining. do not cover the grid with foil. The bottom of the pan may be lined with aluminum foil for easier cleaning.

Trim excess fat to reduce spattering. Slit the remaining fat on the edges to avoid curling.

Broil feature is only available in the upper oven.

Select HI/550°F (288°C) broil for most broiling. Select LO/ 450°F (232°C) broil for low-temperature broiling of longer cooking foods such as poultry to avoid overbrowning.

Pull out oven rack to stop position before turning or removing food. Use tongs to turn food to avoid the loss of juices. Very thin cuts of fish. poultry or meat may not need to be turned.

After broiling. remove the pan from the oven when removing the food. Drippings will bake on the pan if left in the heated oven. making cleaning more difficult.

Before broiling. position rack according to the Broiling Chart.

Preheat oven for 5 minutes. position food on grid in the broiler pan. then place it in the center of the oven rack. Close the door.

To Broil Using Hi/Low Temperature Settings:

Press BROIL. “BROIL” will appear in the upper text area. and HI will be displayed.

After 3 seconds. “Set temp or” will scroll in the upper text area. followed by “Push START.”

Press the Temp/Time “+” or “-” pads to adjust the broil temperature setting to HI or LO.

Press START. “Broiling” will scroll in the upper text area and remains there until the set temperature is reached.

Then “BROIL” will scroll in the upper text area until UPPER CANCEL is pressed.

Preheat oven for 5 minutes. then place food in the oven.

Press UPPER CANCEL when finished.

Remove food from the oven.

BROILING CHART Broil times are based on a 5-minute preheat. Times are guidelines only and may need to be adjusted for individual tastes. Turn meat halfway through cooking time. Recommended rack positions are numbered from the bottom (1) to the top (5). For diagram. see the “Positioning Racks and Bakeware” section.

+When broiling fish. spray broil pan with cooking oil. Do not turn fish filets.

FOOD RACK POSITION SETTING UPPER OVEN COOK TIME (minutes)

Steak 1" (2.5 cm) thick medium HI 12-16

Ground meat patties 4 oz (113 g). ³₄" (2.0 cm) thick up to 12. well-done up to 6. well-done HI 15-20 12-16

Pork chops 1" (2.5 cm) thick. well-done HI 20-25

Chicken bone-in. skin-on breast pieces well-done LO 30-40

Fish* Filets. flaky Steaks. 1" (2.5 cm) thick. flaky LO 10-14

Convection Cooking - Lower Oven Only (on some models)

During convection cooking. the fan provides increased hot air circulation throughout the oven. The movement of heated air around the food helps to speed up cooking by penetrating the cooler outer surfaces.

It is important not to cover foods so that surface areas remain exposed to the circulating air. allowing browning and crisping.

Keep heat loss to a minimum by only opening the oven door when necessary.

Choose cookie sheets without sides and roasting pans with lower sides to allow air to move freely around the food.

Test baked goods for doneness a few minutes before the minimum cooking time with a method such as a toothpick.

Use a meat thermometer to determine the doneness of meats and poultry. Check the temperature of pork and poultry in 2 or 3 different places. including the thickest part.

Before convection cooking. position the rack(s) according to the “Positioning Racks and Bakeware” section.

When using more than one rack. position bakeware/ cookware on the racks to allow movement of the fan circulated air around the food. See the “Positioning Racks and Bakeware” section.

If the oven is full. extra cooking time may be needed.

For optimal cooking results. do not cover food.

When roasting poultry and meat. use a broiler pan and grid. It is not necessary to wait for the oven to preheat. unless recommended in the recipe.

To order a broiler pan. see the “Assistance or Service” section.

Convection Baking (on some models)

Use Convect Bake for single or multiple rack baking. When convection baking. reduce your recipe baking temperature by 25°F (15°C).

To Set Convect Bake:

Press CONVECT BAKE. “CONVECT BAKE” will scroll in the lower text area. and 325°F (163°C) will be displayed.

“Set temp or” will scroll in the lower oven text area. followed by “Push START.”

Press the Temp/Time “+” or “-” pads until the desired temperature is displayed.

Press START to begin preheating oven. “CONVECT BAKE” will scroll in the lower oven text area and “Rapid Preheating for single rack. Press START to preheat for multi-rack” will scroll in the lower oven text area until the set temperature is reached.

NOTE: If the upper oven is in use. the lower oven will default to the standard preheat/multi-rack baking option.

“Insert food for one rack convect only” will scroll twice in the lower text area once the one-rack preheat temperature is reached.

When prompted in the display. Press START if multi-rack baking is desired. If multi-rack baking is selected. “Standard preheating for multi-rack baking. Press Start to preheat for single rack” will appear in the display followed by “Preheating for multi-rack baking.” “Insert food” will appear once the oven set temperature is reached.

When the preheat cycle is complete. “CONVECT BAKE” will scroll in the lower oven text area until LOWER CANCEL is pressed.

Place food in the oven.

To change the oven temperature during cooking. press the Temp/Time “+” or “-” pads until the desired temperature is displayed and then START.

Press LOWER CANCEL when finished.

Remove food from the oven.

Convection Roasting (on some models)

When convection roasting. enter your normal roasting temperature. The roasting time should be 15-30% less than conventional cooking.

It is not necessary to preheat the oven for convect roast.

Place food in oven.

Press CONVECT ROAST. “CONVECT ROAST” will scroll in the lower text area. and 350°F (176°C) will be displayed.

“Set temp or” will scroll in the lower oven text area. followed by “Push START.”

Press the Temp/Time “+” or “-” pads until the desired temperature is displayed.

Press START. “CONVECT ROAST” will scroll in the lower oven text area.

“Preheating” will scroll in the lower oven text area until the set temperature is reached.

When the preheat cycle is complete. “CONVECT ROAST” will scroll in the lower text area. The set temperature will also be displayed.

To change the oven temperature during cooking. press the Temp/Time “+” or “-” pads until the desired temperature is displayed and then START.

“CONVECT ROAST” will remain in the lower text area until LOWER CANCEL is pressed.

Press LOWER CANCEL when finished.

Remove food from the oven.

A. Broiler grid B. Broiler pan

Keep Warm Feature

IMPORTANT: Food must be at serving temperature before placing it in the warmed oven. Food may be held up to 1 hour; however. breads and casseroles may become too dry if left in the oven during the Keep Warm function. For best results. cover food.

The Keep Warm feature allows hot cooked foods to stay at serving temperature.

To Use:

Press the KEEP WARM keypad for desired oven. “KEEP WARM” will scroll in the upper or lower text area (depending on oven selection). and “170°F (77°C)” will be displayed. “Set temp or” will scroll in the selected oven text area. followed by “Push START.”

Press the Temp/Time “+” or “-” pads to adjust the temperature by 5°F (3°C) increments until the desired temperature is displayed.

The temperature can be set from 145°F (63°C) to 190°F (85°C).

NOTE: The temperature may be changed at any time by pressing the Temp/Time “+” or “-” pads until the desired temperature is displayed and then START.

Press START. “Keep Warm” will appear in the selected oven text area. and the set temperature will be displayed. “KEEP WARM” and the temperature will be displayed while the Keep Warm setting is active.

Place food in the oven.

Press CANCEL for the selected oven when finished.

Remove food from the oven.

To Cancel Keep Warm Feature: Press CANCEL for the oven that is in use. Remove food from oven.

Sabbath Mode

The Sabbath Mode allows the range to operate in compliance with the Star-K Jewish Sabbath requirements for a Bake cycle. including Timed Bake or Delayed Bake functions. To use the Sabbath Mode on this range note the following:

The Sabbath Mode feature must first be enabled. This is done only one time and only if Sabbath Mode is expected to be used at a later time.

When Sabbath Mode is enabled all range features and functions operate the same as before Sabbath Mode was enabled.

When Sabbath Mode is enabled and activated it can be used for any Bake. Timed Bake or Delayed Bake cycle by completing the steps in “To Activate Sabbath Mode” in this section.

When Sabbath Mode is activated your range will run under the following conditions:

All cooking functions are disabled except for Bake. Timed Bake and Delayed Bake.

The following keypads can be used: Bake. Cancel. Start.

Kitchen Timer and the Temp/Time “+” and “-” arrows.

The following features are disabled and cannot be used: all tones and chimes; timers; 12 Hour Shutoff; Oven Cleaning and Energy Save.

Cooktop burners can be used.

The oven light will not change and will remain on or off all the time. even if the Oven Light keypad is pressed or the oven doors are opened or closed.

For best results. cooking should be done on one rack in the upper oven and one rack in the lower oven.

To Enable Sabbath Mode (one time only): Sabbath Mode must be enabled to allow the control to activate a Bake. Timed Bake or Delayed Bake under the conditions listed previously.

Press SETTINGS eight times until “SABBATH” appears in the upper text area.

Press the Temp/Time “+” arrow pad to enable Sabbath Mode. “ON Selected” scrolls twice in the upper text area. The oven is now enabled to be run in Sabbath Mode.

Press CANCEL to exit. Sabbath Mode remains enabled.

NOTE: To disable the Sabbath Mode. repeat the previous steps 1-3. “Sabbath OFF” should scroll in the display.

To Activate Sabbath Mode: Sabbath Mode can be activated for a Bake. Timed Bake or Delayed Bake if Sabbath Mode has been enabled.

Start a Bake. Timed Bake or Delayed Bake.

If Sabbath Mode is to be used for both ovens. start a Bake.

Timed Bake or Delayed Bake in the second oven.

Press and hold KITCHEN TIMER for 5 seconds. “Sabbath Bake” appears in the upper text area for 3 seconds.

For a Timed Bake function. the time will also be displayed.

To Adjust Temperature (when Sabbath Mode is running in only one oven):

Press the Temp/Time “+” or “-” arrow pads. Each press of the pads will increase or decrease temperature by 25°F (14°C).

No temperature change will appear in the display.

Press and hold START longer than 1 second to set the temperature change. No temperature change will appear in the display.

To Adjust Temperature (when Sabbath Mode is running in both ovens):

Press BAKE for the desired oven.

Press the Temp/Time “+” or “-” arrow pads. Each press of the pads will increase or decrease temperature by 25°F (14°C).

No temperature change will appear in the display.

Press and hold START longer than 1 second to set the temperature change. No temperature change will appear in the display.

To Deactivate Sabbath Mode: Sabbath Mode can be deactivated at any time during an active Sabbath Mode.

Press and hold KITCHEN TIMER for 5 seconds to return to regular baking or press CANCEL to turn off the oven(s).

If a Power Failure Occurs During Sabbath Mode If a power failure occurs during Sabbath Mode. and the upper text area displays “Sabbath. press the Upper Oven or Lower Oven CANCEL to exit Sabbath Mode. The display will show the time of day. Sabbath Mode is no longer active. but it is still enabled for the range.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Favorite

The Favorite feature allows you to save the time and temperature settings from any active cook function.

To Save a Cooking Function as a Favorite:

Press and hold FAVORITE until “PRESS + FOR UPPER OVEN” appears in the upper text area. and “PRESS (-) FOR LOWER OVEN” appears in the lower text area.

Press the Temp/Time “+” or “-” pad to select the oven in use.

The selected cooking function will be displayed in the selected oven text display area for 3 seconds.

“SAVED” will scroll in the selected oven text display area for 3 seconds. If a cook time is programmed. it will be displayed.

The cooking function is now stored as a Favorite. and the control resumes operation of the saved cooking function.

To Recall and Start a Favorite:

Press FAVORITE.

The name of the saved cook function will scroll into the display text area of the oven that it was saved from for 3 seconds.

“Set temp or” appears in the display followed by “Push START.”

Press START.

The name of the saved cook function will scroll into the display text area of the oven that it was saved from for 3 seconds followed. by the appropriate preheating message.

The temperature and time displays are active and indicate the current oven temperature (if below 170°F. “Lo” is displayed) and the countdown time elapsed.

The set temperature can be changed by pressing the Temp/ Time “+” or “-” pads. then START. Similarly. the Cook Time can be changed by pressing COOK TIME then the Temp/Time “+” or “-” pads to adjust to the desired time. then START. If the cook time is adjusted. the time remaining is increased by the additional time.

Once the set temperature is reached. the temperature will display. and the name of the saved cook function will scroll into the display text area of the oven that it was saved from until the Cook Time countdown has been completed.

Place food in the oven.

Press CANCEL for the oven that is being used when finished.

Remove food from the oven.

To Cancel a Favorite Cycle:

Press UPPER or LOWER CANCEL (depending on the oven where the Favorite function is operating).

The stored Favorite cycle will not be affected.

Remove food from the oven.

Timed/Delay Cooking

Timed Cooking allows the oven(s) to cook for a set length of time.

Delay Cooking allows the oven(s) to be set to turn on at a certain time of day. Delay start should not be used for food such as breads and cakes because they may not bake properly.

Timed Cooking is available on most cycles except Self-Clean and Keep Warm.

Delay Cooking is available on the Bake. Convect Bake. and Convect Roast cycles.

To Set a Cook Time:

Press the button for any cooking function except Self-Clean or Keep Warm.

Press the Temp/Time “+” or “-” pads to enter a temperature other than the one displayed then press START.

Press COOK TIME.

Press Temp/Time “+” or “-” pads to enter the length of time to cook.

Press START.

The cook time countdown will appear on the oven display.

When the stop time is reached. the oven will shut off automatically. and end-of-cycle tones will sound.

To Set a Delay Cooking Time: Before setting. make sure the clock is set to the correct time of day. See “Clock” in the “Settings” section.

Press the button for any cooking function except Self-Clean or Keep Warm.

Press the Temp/Time “+” or “-” pads to enter a temperature other than the one displayed then press START.

Press DELAY START.

Press Temp/Time “+” or “-” pads to enter the delay start time.

The delay start time is the amount of time by which you want to delay the start.

Press START.

Press the Temp/Time “+” or “-” pads to enter the desired length of cooking time.

Press START.

The start time is automatically calculated and displayed.

The delay countdown appears on the oven display.

When the start time is reached. the oven will automatically turn on. The cook time countdown will appear on the oven display.

The set temperature and minute time countdown will appear on the oven display.

When the stop time is reached. the oven will shut off automatically and end-of-cycle tones will sound.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

RANGE CARE

Self-Cleaning Cycle

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.

Self-clean the oven before it becomes heavily soiled. Heavy soil results in longer cleaning and more smoke.

Keep the kitchen well-ventilated during the Self-Cleaning cycle to help get rid of heat. odors. and smoke.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. Depending on your model. see “Oven Vent” or “Oven Vents” section.

Do not clean. rub. damage or move the oven door gasket. The door gasket is essential for a good seal.

Prepare Oven:

Remove the broiler pan. grid. cookware and bakeware and. on some models. the temperature probe from the oven.

Remove oven racks to keep them shiny and easy to slide.

See “General Cleaning” section for more information.

Remove any foil from the oven because it may burn or melt. damaging the oven.

Hand clean inside door edge and the 1½" (3.8 cm) area around the inside oven cavity frame. being certain not to move or bend the gasket. This area does not get hot enough during self-cleaning to remove soil. Do not let water. cleaner. etc. enter slots on door frame. Use a damp cloth to clean this area.

Wipe out any loose soil to reduce smoke and avoid damage.

At high temperatures. foods react with porcelain. Staining. etching. pitting or faint white spots can result. This will not affect cooking performance.

Prepare Cooktop:

Remove plastic items from the cooktop because they may melt.

NOTE: The cooktop burners will not function during the self clean cycle.

IMPORTANT: Oven temperature must be below 400°F (205°C) to program a clean cycle.

Only 1 oven can be cleaned at a time.

Both oven doors lock when either oven is being cleaned.

How the Cycle Works IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring. loss of gloss. hairline cracks and popping sounds.

The Self-Cleaning cycle uses very high temperatures. burning soil to a powdery ash.

The oven is preset for a 3 hour clean cycle; however. the time can be changed. Suggested clean times are 2 hours for light soil and between 3 hours and 4 hours for average to heavy soil.

Once the oven has completely cooled. remove ash with a damp cloth. To avoid breaking the glass. do not apply a cool damp cloth to the inner door glass before it has completely cooled.

The oven light will not work during the Self-Cleaning cycle.

When “LOCK” shows in the display. the door cannot be opened.

To avoid damage to the door. do not force the door open when “LOCK” is displayed.

If an oven door is left open. “Door Open? Clean Canceled” will appear in the display and a signal will beep. Close the oven door and press SELF CLEAN.

NOTE: Only one oven can use the Self-Clean cycle at a time. and 24 hours must pass before the next Self-Clean cycle can begin.

To Self-Clean:

Close the oven door.

Press SELF CLEAN. “PRESS (+) FOR UPPER OVEN” will appear in the upper oven text area. and “PRESS (-) FOR LOWER OVEN” will appear in the lower oven text area

Press the Temp/Time “+” or “-” pads to select the desired oven. “REMOVE RACKS” will scroll in the selected oven text area followed by “SELECT OPTION.” In the other text area. “PRESS + or - KEY” will scroll from left to right.

Choose the Standard Clean setting by pressing the Temp/ Time “+” or “-” pads until “STANDARD CLEAN” and “PUSH START” scroll in the displays.

Press START. “Select level” appears in the display.

Press the Temp/Time “+” or “-” pads to adjust the clean level.

Press START. “UNLOCK IN XXX” will scroll in the upper or lower text area (depending on oven selection). “LOCKING” will scroll until the door is locked.

After the door is lock. “CLEAN UPPER” or “CLEAN LOWER” will scroll in the selected oven text area until the clean cycle is finished.

When the self-clean cycle ends: “CLN COMPLETE” will scroll in the selected oven text area. “OVEN COOLING” will scroll in the display until the oven temperature falls below 500°F (260°C). “UNLOCKING” will be displayed until the oven door unlocks and the lock icon turns off.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

To Delay Start Self-Clean:

Press Delay Start. “PRESS (+) FOR UPPER OVEN” will appear in the upper text area. and “PRESS (-) FOR LOWER OVEN” will appear in the lower text area.

Press the Temp/Time “+” or “-” pads to select the desired oven. “--:--” will be displayed. and “Set starting time. Push START” will scroll from right to left in the selected oven text area for 2 minutes or until the Temp/Time “+” or “-” pads are pressed again.

Press the Temp/Time “+” or “-” pads until the desired time is reached. “Select cooking/cleaning mode” will scroll in the selected oven text area for 2 minutes or until a cleaning cycle is selected.

Press SELF CLEAN. “REMOVE RACKS” will scroll in the selected oven text area for 5 seconds. followed by “SELECT OPTION.” In the other text area. “PRESS + or - KEY” will scroll from left to right.

Press the Temp/Time “+” or “-” pads until “Standard Clean” is displayed. “Push START” will scroll in the selected oven text area.

Press START. “Select level” appears in the display.

Press the Temp/Time “+” or “-” pads to select the desired cleaning level.

Press START.

The cleaning cycle will begin. when the delay time is reached.

“UNLOCK IN XXX” will scroll in the upper or lower text area (depending on oven selection). After 5 seconds. “LOCKING” will scroll until the door is locked.

After the door is lock. “CLEAN UPPER” or “CLEAN LOWER” will scroll in the displays until the clean cycle is finished.

When the self-clean cycle ends: “CLN COMPLETE” will scroll in the selected oven text area. “OVEN COOLING” will scroll in the display until the oven temperature falls below 500°F (260°C). “UNLOCKING” will be displayed until the oven door unlocks and the lock icon turns off.

General Cleaning

IMPORTANT: Before cleaning. make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products.

Soap. water and a soft cloth or sponge are suggested first unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

Food spills containing acids. such as vinegar and tomato. should be cleaned as soon as the entire range is cool. These spills may affect the finish.

Cleaning Method:

Glass cleaner. mild liquid cleaner or nonabrasive scrubbing pad: Gently clean around the model and serial number plate because scrubbing may remove numbers.

STAINLESS STEEL (on some models)

To avoid damage to stainless steel surfaces. do not use soap filled scouring pads. abrasive cleaners. Cooktop Cleaner. steel wool pads. gritty washcloths or abrasive paper towels.

Cleaning Method: Rub in direction of grain to avoid damaging.

Liquid detergent or all-purpose cleaner: Rinse with clean water and dry with soft. lint-free cloth.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids. such as vinegar and tomato. should be cleaned as soon as the cooktop. grates and caps are cool.

These spills may affect the finish.

To avoid chipping. do not bang grates and caps against each other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while they are wet.

Cleaning Method:

Nonabrasive plastic scrubbing pad and mildly abrasive cleanser:

Clean as soon as cooktop. grates and caps are cool.

Dishwasher (grates only. not caps):

Use the most aggressive cycle. Cooked-on soils should be soaked or scrubbed before going into a dishwasher.

Gas Grate and Drip Pan Cleaner Part Number 31617: See “Assistance or Service” section to order.

GRIDDLE

Before using the griddle for the first time and after each use. wash thoroughly with mild dishwashing detergent and warm water.

To avoid damaging the nonstick finish. it is not recommended to wash the griddle in the dishwasher.

To avoid damage. do not use abrasive cleaning products or scouring pads.

COOKTOP CONTROLS

To avoid damage to the cooktop controls. do not use steel wool. abrasive cleansers or oven cleaner.

To avoid damage. do not soak knobs.

When removing or replacing knobs. make sure knobs are in the Off position.

Do not remove seals under knobs. if present.

Cleaning Method:

Warm. soapy water: Pull knobs straight away from control panel to remove.

CONTROL PANEL

To avoid damage to the control panel. do not use abrasive cleaners. steel-wool pads. gritty washcloths or abrasive paper towels.

To avoid turning the controls on while cleaning. you may activate the Control Lock feature (on some models). See “Control Lockout” section.

Cleaning Method:

Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge. not directly on panel.

OVEN DOOR EXTERIOR

Cleaning Method:

Glass cleaner and paper towels or nonabrasive plastic scrubbing pad: Apply glass cleaner to soft cloth or sponge. not directly on panel.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high temperatures. foods react with porcelain and staining. etching. pitting or faint white spots can result.

Cleaning Method:

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

OVEN RACKS

Cleaning Method:

Self-Cleaning cycle: See “Self-Cleaning Cycle” first. Remove racks. or they will discolor and become harder to slide. If this happens. a light coating of vegetable oil applied to the rack guides will help them slide.

Steel-wool pad

Oven Light

The ovens light is a standard 40-watt appliance bulb.

Before replacing. make sure the oven and cooktop are cool and the control knobs are off.

To Replace:

Unplug range or disconnect power.

Turn the glass bulb cover in the back of the oven counterclockwise to remove.

Turn bulb counterclockwise to remove from socket.

Replace bulb. then bulb cover by turning clockwise.

Plug in range or reconnect power.

Oven Door

IMPORTANT: To avoid oven door glass breakage:

Do not close the oven door if the racks are not fully inserted into the oven cavity or when bakeware extends past the front edge of an oven rack.

Do not set objects on the glass surface of the oven door.

Do not hit glass surfaces with bakeware or other objects.

Do not wipe down glass surfaces until the oven has completely cooled.

For normal range use. it is not suggested to remove the oven door. However. if removal is necessary. make sure the oven is off and cool. Then. follow these instructions. The oven door is heavy.

To Remove:

Open oven door all the way.

Pull forward and down on the hinge latch on each side.

Close the oven door as far as it will shut.

Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from the oven door frame.

To Replace:

Insert both hanger arms into the door.

Open the oven door.

You should hear a “click” as the door is set into place.

Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not. repeat the removal and installation procedures.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Is the power supply cord unplugged?

Plug into a grounded 3 prong outlet.

Household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues. call an electrician.

Is the main or regulator gas shutoff valve in the off position?

See Installation Instructions.

Is the range properly connected to the gas supply?

Contact a trained repair specialist or see Installation Instructions.

Surface burners will not operate

Is this the first time the surface burners have been used?

Turn on any one of the surface burner knobs to release air from the gas lines.

Is the control knob set correctly?

Push in knob before turning to a setting.

Are the burner ports clogged?

See “Sealed Surface Burners” section.

Surface burner flames are uneven. yellow and/or noisy

Are the burner ports clogged?

See “Sealed Surface Burners” section.

Are the burner caps positioned properly?

See “Sealed Surface Burners” section.

Is propane gas being used?

The range may have been converted improperly. Contact a service technician or see “Assistance or Service” section.

Surface burner makes popping noises

Is the burner wet?

Let it dry.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area. element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

Is the proper cookware being used?

See “Cookware” section.

Is the control knob set to the proper heat level?

See “Cooktop Controls” section.

Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

Is this the first time the oven has been used?

Turn on any one of the surface burner knobs to release air from the gas lines.

Is the electronic oven control set correctly?

See “Electronic Oven Control(s)” section.

On some models. is the Control Lock set?

See “Control Lockout” section.

Oven burner flames are yellow or noisy

Is propane gas being used?

The range may have been converted improperly. Contact a service technician or see “Assistance or Service” section.

Oven temperature too high or too low

Does the oven temperature calibration need adjustment?

See “Oven Temperature Control” section.

Display shows messages

Is the display showing a flashing time?

There has been a power failure. Clear the display. On some models. reset the clock. if needed. See “Clock” in the “Settings” section.

Is the display showing a letter followed by a number?

Depending on your model. press CANCEL to clear the display. If it reappears. call for service. See “Assistance or Service” section.

Self-Cleaning cycle will not operate

Is the oven door open?

The display will show “door.” Close the oven door all the way.

Has the function been entered?

See “Self-Cleaning Cycle” section.

On some models. has a delay start Self-Clean cycle been set?

See “Self-Cleaning Cycle” section.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death. fire. or electrical shock.

WARNING

Has a delay start been set?

See “Delay Start” section.

Is the oven temperature above 400°F (205°C)?

Let the oven cool before using the self-clean cycle.

Oven cooking results not what expected

Is the range level?

Level the range. See the Installation Instructions.

Is the proper temperature set?

Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set?

See “Oven Temperature Control” section.

Was the oven preheated?

See “Baking” section.

Is the proper bakeware being used?

See “Bakeware” section.

Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

Is there proper air circulation around bakeware?

See “Positioning Racks and Bakeware” section.

Is the batter evenly distributed in the pan?

Check that batter is level in the pan.

Is the proper length of time being used?

Adjust cooking time.

Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer cooking times.

Are baked items too brown on the bottom?

Move rack to higher position in the oven.

Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

ASSISTANCE OR SERVICE

Before calling for assistance or service. please check “Troubleshooting.” It may save you the cost of a service call. If you still need help. follow the instructions below.

When calling. please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts If you need to order replacement parts. we recommend that you use only factory specified parts. Factory specified parts will fit right and work right because they are made with the same precision used to build every new MAYTAG appliance.

To locate factory specified parts in your area. call the following customer assistance telephone number or your nearest designated service center.

In the U.S.A.

Call Maytag Customer eXperience Center toll free: 1-800-688-9900. or visit our website at www.maytag.com Our consultants provide assistance with:

Features and specifications on our full line of appliances.

Installation information.

Use and maintenance procedures.

Accessory and repair parts sales.

Specialized customer assistance (Spanish speaking. hearing impaired. limited vision. etc.).

Referrals to local dealers. repair parts distributors and service companies. Maytag appliances designated service technicians are trained to fulfill the product warranty and provide after-warranty service. anywhere in the United States.

To locate the Maytag appliances designated service company in your area. you can also look in your telephone directory Yellow Pages.

For further assistance If you need further assistance. you can write to Maytag appliances with any questions or concerns at: Maytag Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor. MI 49022-2692

Please include a daytime phone number in your correspondence.

Accessories

For accessories. you can visit our website at www.maytag.com/cookingaccessories.

Broiler Pan Order Part Number 4396923 www.maytag.com/broilerpan

In Canada

Call the Whirlpool Canada LP Customer eXperience Centre toll free 1-800-807-6777 or visit our website at www.maytag.ca.

Our consultants provide assistance with:

Features and specifications on our full line of appliances.

Use and maintenance procedures.

Accessory and repair parts sales.

Referrals to local dealers. repair parts distributors and service companies. Maytag appliances designated service technicians are trained to fulfill the product warranty and provide after-warranty service. anywhere in Canada.

For further assistance If you need further assistance. you can write to Whirlpool Canada LP with any questions or concerns at: Whirlpool Canada LP Customer eXperience Centre 200 - 6750 Century Ave Mississauga. Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

MAYTAG GAS RANGE LIMITED WARRANTY

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR) For one year from the date of purchase. when this major appliance is installed. operated and maintained according to instructions attached to or furnished with the product. Maytag brand of Whirlpool Corporation or Whirlpool Canada. LP (hereafter “Maytag”) will pay for factory specified replacement parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY (CERTAIN COMPONENT PARTS ONLY - LABOR NOT INCLUDED) In the second through tenth years from the date of original purchase. when this major appliance is installed. operated and maintained according to instructions attached to or furnished with the product. Maytag will pay for factory specified parts for the following components to correct non-cosmetic defects in materials or workmanship in this part that prevent function of the range and that existed when this major appliance was purchased. This is a limited 10-year warranty on the below named parts only and does not include labor.

Burner grates

Gas surface burners

Gas bake/broil burners (excludes convection element)

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THE LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Maytag designated service company. This limited warranty is valid in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of the original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY This limited warranty does not cover:

Service calls to correct the installation of your major appliance. to instruct you on how to use your major appliance. to replace or repair house fuses. or to correct house wiring or plumbing.

Service calls to repair or replace appliance light bulbs. air filters or water filters. Consumable parts are excluded from warranty coverage.

Repairs when your major appliance is used for other than normal. single-family household use or when it is used in a manner that is contrary to published user or operator instructions and/or installation instructions.

Damage resulting from accident. alteration. misuse. abuse. fire. flood. acts of God. improper installation. installation not in accordance with electrical or plumbing codes. or use of consumables or cleaning products not approved by Maytag.

Cosmetic damage. including scratches. dents. chips or other damage to the finish of your major appliance. unless such damage results from defects in materials or workmanship and is reported to Maytag within 30 days from the date of purchase.

Any food loss due to refrigerator or freezer product failures.

Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty.

Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Maytag servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

11. Major appliances with original model/serial numbers that have been removed. altered or cannot be easily determined. This warranty is void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES. INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada. contact your authorized Maytag dealer to determine if another warranty applies.

If you think you need repair service. first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the problem after checking “Troubleshooting. additional help can be found by checking the “Assistance or Service” section or by calling Maytag. In the U.S.A. call 1-800-688-9900. In Canada. call 1-800-807-6777.

5/10

Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.

Write down the following information about your major appliance to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial number. You can find this information on the model and serial number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date



Newest Added: ART348FFFS KCGC506JSS UXT4136ADS MER7662WW CVGX2423B

Tags: KitchenAid Spiralizer, Kitchenaid Professional 5 Plus, Kitchenaid Plus 275 Watt Mixer, Kitchen Aid Professional 5, Kitchenaid + Professional 5, Kitchenaid Professional 5 Plus Manual

KitchenAid MGT8775XB | File type: PDF | Filename: mgt8775xb.pdf | Size: 1.78 MB | Language: English | Other documents: 4 files.

Download User Manual

Contact us

KitchenAid in United States

1 (800) 422-1230, 1 (800) 541-6390 Hours of Operation Mon - Fri: 8 a.m. - 8 p.m. EST