Owner 's Manual - Page 94

For FIT 2008.

Loading ...
Loading ...
Loading ...
Whenyoufolddownthedriversside
rear seat, use the latch plate to
release the center seat belt from the
detachable anchor (see page ).
Allow the seat belt to retract into the
holder on the ceiling, and store the
buckles in it.
Move the front seat cushions as
far forward as possible.
The rear seat-backs can be folded
down for more cargo room.
Each side folds down separately, so
you can still carry a passenger in the
rear outer seating position.
Remove any items from the seat
before folding down the seat-back.
Make sure there are no items on the
floor before folding down the seats.
To return the seat cushion to its
original position, first make sure
there are no items on the floor, then
pull up the seat leg fully, and push
down the seat cushion slowly while
holding it with your hands. Set the
seat leg in the floor guide. A latch
comes out when the leg is set
properly. 1.
93
CONTINUED
Folding the Rear Seat Down
Seats
Instruments and Controls
91
LATCH PLATE
FLOOR GUIDE LATCH
LEG
07/06/28 20:28:20 31SAA610 0096 
2008 Fit
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...