Loading ...
Loading ...
Loading ...
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
Thesystemshouldbeleftinfresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
Turning this dial clockwise increases
the temperature of the airflow.
Turn this dial to increase or decrease
the fan speed and airflow.
This button turns the air
conditioning on and off. The
indicatorinthebuttonisonwhen
the A/C is on.
This lever controls the source of the
air going into the system. When you
slide the lever to the side, air is
brought in from outside the vehicle
(fresh air mode). When you select
the side, air from the vehicle’s
interior is sent through the system
again (recirculation mode).
Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
corner vents in all modes.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the floor
vents.
Air flows from the center
and corner vents in the dashboard.
Air flows from the defroster
vents at the base of the windshield.
Airflow is divided between
the floor vents and defroster vents at
the base of the windshield.
When you select or ,
the system automatically turns on
the A/C (if equipped). You cannot
turn the A/C off in this mode.
This button turns the rear window
defogger on and off (see page ).74
If equipped
Rear Window Defogger Button
Air Conditioning (A/C) Button
Temperature Control Dial
Fan Control Dial
Fresh Air/Recirculation Lever
Mode Control Dial
Airflow Controls
Vents, Heating, and A/C
Features
103
０７／０６／２８ ２０：２９：５１ ３１ＳＡＡ６１０ ０１０８
2008 Fit
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...