Loading ...
Loading ...
Loading ...
27
> Before start > Hookup > Setup > Playback >Part Names
Rear Panel
1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV
component digital audio signals with a digital optical
cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM 75Ω terminal: The supplied
antennas are connected.
3. VIDEO IN jacks: Input the AV component video signals
with an analog video cable.
4. COMPONENT VIDEO IN jacks: Input the AV component
video signals with a component video cable.
5. NETWORK port: Connect to the network with an
Ethernet cable.
6. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
as a TV or projector.
7. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component.
8. Wireless antenna: Used for Wi-Fi connection or when
using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.
9. Power cord (North American, European, Australian and
Asian models)
AC IN (Taiwanese models): The supplied power cord is
connected.
10.
SIGNAL GND terminal: The ground wire of the turntable
is connected.
11.
AUDIO IN jacks: Input AV component audio signal with
an analog audio cable.
12.
SPEAKERS terminals: Connect speakers with speaker
cables. (North American models are compatible with
banana plugs.)
13.
ZONE 2 LINE OUT jack: Output audio signals with an
analog audio cable to a pre-main amplifier in a separate
room (ZONE 2).
14.
SUBWOOFER PRE OUT jack: Connect a powered
subwoofer with a subwoofer cable. Up to two powered
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER PRE OUT jacks.
1110 1312
8
1
23 5 764
14
8
9
180°
90°
9
(Taiwanese models)
SN29402189_VSX-1131_BAS_En.book 27 ページ ２０１６年１月１８日 月曜日 午後６時２１分
Loading ...
Loading ...
Loading ...