Loading ...
DIAMOND CLEAN
The action of the steam released during this special
low-temperature cleaning cycle allows dirt and food residues
to be removed with ease. Pour 200 ml of drinking water on
the bottom of the oven and only activate the function when
the oven is cold.
* Function used as reference for the energy efficiency declaration in
accordance with Regulation (EU) No.65 / 2014
1. SELECT A FUNCTION
To select a function, turn the selection knob to the symbol
for the function you require: the display will light up and an
audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the thermostat knob
to set the temperature you require.
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by turning the
thermostat knob.
The function will not start if the thermostat knob is on 0 °C. You can
set the cooking time, cooking end time (only if you set a cooking
time) and a timer.
AUTOMATIC
To start the automatic function you have selected (“Bread”
or “Dessert”), keep the thermostat knob at the position for
automatic functions ( ).
To finish cooking, turn the selection knob to position 0.
Please note: You can set the cooking end time and timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing
icon on the display indicate that the preheating phase has
been activated.
At the end of this phase, an audible signal and the fixed icon
on the display will indicate that the oven has reached
the set temperature: at this point, place the food inside and
proceed with cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
“0”.
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the icon and “00:00” start flashing
on the display.
Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use to reset
the cooking time to “00:00”.
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the function can
be delayed by programming its end time: press until the
icon and the current time start flashing on the display.
Use or to set the time you want cooking to end and
press to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused
until it starts automatically after the period of time that has
been calculated in order for cooking to finish at the time you
have set.
Please note: To cancel the setting, switch the oven off by turning
the
selection knob to position “ ”.
Please note: Delay to start functionality is not available for Grill and
Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will indicate
that the function has finished.
Turn the selection knob to select a different function or to
position “ ” to switch the oven off.
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while a
function is active or when the oven is off.
Keep pressing
until the icon and “00:00” start flashing
on the display.
Use or to set the time you require and press to
confirm.
An audible signal will sound once the timer has finished
counting down the selected time.
Notes: To cancel the timer, keep pressing
until the icon starts
flashing, then use to reset the time to “00:00”.
Loading ...
Loading ...
Loading ...