Sirius SDDH-1.1 Valentina Series Induction Cooktop

User Manual - Page 78

For SDDH-1.1.

PDF File Manual, 88 pages, Read Online | Download pdf file

SDDH-1.1 photo
Loading ...
Loading ...
Loading ...
S-DDH1 S-DDH276
EN
Once the installation is completed it is necessary
to give electricity supply to the Downdraft press-
ing the red button placed above the metallic box
with the wiring boards inside.
If the product is not provided with a plug or if the
plug is not easily accessible, it will be necessary
to install a thermomagnetic circuit breaker switch
on the electricity line between the product and
the electrical system to which it is connected
to that has a contact aperture of the poles of at
least 3mm.
WARNING
Place the metal box containing the elec-
tronic components at a distance of no less
than 65 cm from gas-operated cook tops or
in any case, 65 cm from the suctioning sur-
face of the cooker hood.
NOTE
We recommend installing the metal box
containing the electronic components at
least 10 cm above floor level and at a suita-
ble distance from all heat sources (e.g. oven
sides or cook top).
CAUTION
This appliance is fitted with an H05 VVF 3
conductor, 0.75 mm
2
(neutral, phase, and
ground) power cord.
This can be connected up to a 220 - 240 V
mono-phase electrical network through a
CEI 60083 approved power socket, which
must remain accessible after installation, in
compliance with installation regulations.
We decline any responsibility in case of ac-
cidents caused by a lack of ground connec-
tion or incorrect ground connection. The
appliance must be fed through a differen-
tial protection device (RCD), with a nominal
residual current not exceeding 30mA. If the
power cord is damaged, call the after-sales
service to avoid any risk.
WARNING
Connecting the product to the mains elec-
tricity must be carried out by technically
qualified and specialised personnel.
The product must be connected to an elec-
trical system correctly designed and in-
stalled.
The electrical system must comply with
VDE0100 standard.
DANGER
If the product shows signs of a fault, dis-
connect the appliance or remove the fuse
corresponding to the disconnection line of
the appliance.
ELECTRICAL
CONNECTION OF
THE DOWNDRAFT
Loading ...
Loading ...
Loading ...