Loading ...
Loading ...
Loading ...
＊
＊
The brake system indicator normally
comes on when you turn the ignition
switch to ON (II) and as a reminder
to check the parking brake. It will
stay lit if you do not fully release the
parking brake.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
thenexttimeyoustopataservice
station (see page ).
If the fluid level is low, take your
vehicle to the dealer and have the
brake system inspected for leaks or
worn brake pads.
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system’s dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down and
you will have to press harder on the
pedal.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see
on page ).
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.
If the ABS indicator comes on with
the brake system indicator, have the
vehicle inspected by your Honda
dealer immediately.
272
230
Brake System Indicator
Taking Care of the Unexpected
Emergency
Towing
271
BRAKE SYSTEM INDICATOR
U.S. indicator shown
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...