Loading ...
Loading ...
Loading ...
9
Part 3 INITIAL STEPS FOR INSTALLING YOUR DRYER
⚦ Push the cap on the right side of control
panel.
⚧ Remove the screw.
⚨ Slide the control panel to the right about
an inch.
STEP 3 Procedure of Control Panel Change
1
Push the housing hook and disassemble the
panel.
2
Remove the safety cover.
1
Attach the housing of control panel until it
clicks into place.
2
Remove the plate by lifting it up slightly.
3
⚦ Push the cap on the right side of lower
cover.
⚧ Remove the screw.
⚨ Slide the lower cover to the right about an
inch.
4
Disassemble
Assemble
WARNING!
WARNING!
!
!
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Be careful of the sharp edge on frame which makes you hurt.
• Failure to follow these instructions can result in death or electrical shock.
Housing
Hook
Frame
Control Panel
Cap
Plate
Lower, Cover
Cap
Safety Cover
Housing
Frame
⚦
⚧
⚧
⚨
⚨
LG is not responsible for any damages to your
dryer incurred while a customer is changing.
Note
Be careful of dropping the control panel.
WARNING!
!
Make sure that the housing is attached correctly.
If not, the dryer may not operate.
⚦
Loading ...
Loading ...
Loading ...