Loading ...
Loading ...
Loading ...
32
ENGLISH
13
Empty the drip tray and co ee grounds drawer and place them back.
14
Put the container back under both the steam/hot water wand and the
co ee dispensing spout.
15
When the “ ” button ashes, press it to start the rinse cycle.
Note:
The rinse cycle may be paused by pressing the
“ ”
button. To continue the
cycle, press the
“ ”
button again. During the pause the
“ ”
button ashes.
During the descaling cycle the
“ ”
button is steady on. This allows you to
empty the container or to stay away from the machine for a brief period of
time.
16
When the
“ ” light is steady on, the water tank is empty.
Repeat steps
9-15. When the
“ ”
light is steady on again, go to step 17.
17
When the water tank is empty, remove it, rinse it and ll it up to the
MAX level with fresh water. Place it back into the machine.
Note:
The circuit must be cleaned with a preset quantity of water.
If the water tank is not lled up to MAX level, the machine might require
three or more re lls for rinsing.
18
When the amount of water needed for the rinse cycle has been com-
pletely dispensed the cleaning cycle button turns o , the “
” button
is steady on and the
“ ”
and
“ ”
lights ash to indicate that the
machine needs to be primed.
1
2
3
Loading ...
Loading ...
Loading ...