Loading ...
Loading ...
Loading ...
Ice & Water Dispenser (on some models)
Stainless Steel Refrigerator
12
To use the
dispenser
Press the rim of the glass gently against the
dispenser pad.
Select CUBES , CRUSHED ICE
(on some models) or WATER .
The spill shelf is not self-draining. To
reduce water spotting, the shelf and its
grille should be cleaned regularly.
If no water is dispensed when the
refrigerator is first installed, there may
be air in the water line system. Press the
dispenser pad for at least two minutes to
remove trapped air from the water line
and to fill the water system. To flush out
impurities in the water line, throw away
the first six glassfuls of water.
A light switch (on some models) turns the
night light in the dispenser on or off. The
light also comes on when the dispenser
pad is pressed. The light in the dispenser
should be replaced with a 7-watt maximum
bulb when it burns out.
CAUTION: Never put fingers or any
other objects into the ice crusher
discharge opening.
Ice storage
bin
To remove:
Lift the left corner to free the bin from the
shelf and pull the bin straight out while
supporting it at front and rear.
To replace:
Slide the bin back until the tab on the bin
locks into the slot on the shelf. If the bin
does not go all the way back, remove it and
rotate the drive mechanism 1/4 turn. Then
push the bin back again.
Spill Shelf
Rotate
Drive
Mechanism
Loading ...
Loading ...
Loading ...