Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chap‐
ter.
comes on.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is incorrect. Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions.
Refer to “Technical infor‐
mation” chapter.
FlexiBridge function oper‐
ates. One or more sections
of the function mode which
operates are not covered
by the cookware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the
function mode.
Refer to "Flexible induction
cooking area" chapter.
PowerSlide function oper‐
ates. Two pots are placed
on the flexible induction
cooking area.
Use only one pot.
Refer to "Flexible induction
cooking area" chapter.
and a number come on.
There is an error in the
hob.
Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical
system of the house. Con‐
nect it again. If comes
on again, speak to an Au‐
thorised Service Centre.
comes on.
There is an error in the hob
because a cookware
boiled dry. Automatic
Switch Off and the over‐
heating protection for the
zones operate.
Deactivate the hob. Re‐
move the hot cookware.
After approximately 30
seconds, activate the zone
again. If the cookware was
the problem, the error mes‐
sage goes out. Residual
heat indicator can stay on.
Let the cookware become
sufficiently cool. Check if
your cookware is compati‐
ble with the hob.
Refer to “Hints and tips”
chapter.
ENGLISH 21
Loading ...
Loading ...
Loading ...