Loading ...
Loading ...
Loading ...
12
Use reverse procedures to put accessories back in place.
Point when attach free pocket
Insert the left and right
partway, push the top
of claw part in the center
of free pocket, and fit
the claw part.
※Illustration of MR-CX402EJ
Freezer Compartment
Open the drawer-door fully.
Lift up the freezing case
(upper) towards you.
Lift up the freezing case
(lower) towards you.
Take out the freezing case
(upper), and while slightly
lifting up the door draw
out and tilt downwards.
Vegetable Compartment
Open the drawer-door
fully.
Lift out the case.
Lift out the case.
Take out the small vegetables
case. While lifting the
drawer-door slightly,
draw out and tilt downward.
Glass shelf / One-two shelf
Lift up the front side by both hands.
※
If forcefully pulled outward damage may occur to door side.
Please slowly pull and take out.
Pull forward and take out.
If the glass is not attached properly, it will out
and falls which may cause injury.
To ensure that glass side is attached
or removed.
Always follow
instructions
Sliding case (upper), (lower)
※
※
Pull forward.
Sliding case lid cannot be removed.
If difficult to take out, please remove sliding case
after removing the bottle pocket.
Free pocket (large), (small) /
Bottle pocket / Small-Items pocket
※
Lift upward holding right
and left sides.
The piece is
attached quite firmly.
Draw forward to remove.
Bottle pocket
It may fall if not attached properly,
and may cause injury.
Make sure that you removed
and attached properly.
Always follow
instructions
Sliding case lid
Sliding case (upper) Sliding case (lower)
Liquid-Catching Indentations
Wipe away any dirt, liquid or condensation.
Liquid catchers
Toe grille
Remove by pulling
forward on
both sides.
Loading ...
Loading ...
Loading ...