Loading ...
Loading ...
Loading ...
www.BISSELL.com
9
WARNING
Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt
Container in place. Allow components to dry before reassembling the Dirt Container.
Maintenance: Cleaning the Filters
The pre-motor filter is on the back of
the dirt container. Pull on the tab on the
left side to release and remove.
1
2
The post-motor filter can be found at
the back of the vacuum. Press down
on the filter door tab to release and pull
the door out to remove.
3
4
The foam filter can be removed from the
paper filter and rinsed clean. Allow 24
hours to dry before reassembly.
The paper filter should be tapped and
brushed clean only.
Maintenance: Charging the Battery
To charge the battery,
first plug the charger
into a outlet.
1
2
Insert the battery firmly into the
charger.
The charger light will be red
during charging and will turn
green when the battery is fully
charged
A full charge will take 2 hours.
Pull the filter away from the door. Rinse
the filter to clean. Leave to dry for 24
hours before reassembly.
Loading ...
Loading ...
Loading ...