Loading ...
Loading ...
Loading ...
5
Asmbly
Operatis
No tools are required for assembly; simply insert
foot into body of unit until you hear a click.
Charging
Before charging make sure unit is in the OFF
position.
1. Insert the charging adapter plug into the
charging port on the bottom of the charging
base. The unit can also be charged from the
hand vacuum by inserting the charging adapter
plug into the charging port on the back of
the unit.
2. Plug the adapter into the wall outlet. If using
the charging base, place unit onto base. The
power LED lights will illuminate when charging.
Charge the unit completely for 4 hours prior to
first use.
NOTE: The adapter may become warm during
charging – this is normal.
3. When the unit is fully discharged,
approximately 4 hours of charging is required
for the battery to regain full capacity.
Control buttons
The power button is located on the top
of the handle. Settings include:
a. Power Icon = On/Off
b. Brush Icon = Brush On/Off
c. Suction Icon = Normal/High
d. EdgeReach = On/Off
Using your cordless vacuum
1. Push power button ON.
2. Push brush button on to easily clean
hard floors, low pile carpet, and area rugs.
3. Use suction button to control power
of suction.
WARNING
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
1.
a. b.
c. d.
Charging
Battery Status LED Color Light Behavior
100% Blue 3 Lights On, for 10 minutes
99% to 66% Blue
2 Lights On, 1 Light Blinking, 2 Second Fade In & Out
65% to 33% Blue
1 Light On, 1 Light Blinking, 2 Second Fade In & Out
32% to 10% Blue 1 Light Blinking, 2 Second Fade In & Out
9% to 1% Red 1 Light Blinking, 1 Second Fade In & Out
0% Red 1 Light Blinking, 1 Second Fade In & Out
www.BISSELL.com
Loading ...
Loading ...
Loading ...