Loading ...
Loading ...
Loading ...
English - 29
care and cleaning
Certain internal parts are intentionally not grounded and may present a risk of electric shock only
during servicing.
Service Personnel - Do not contact the following parts while the appliance is energized: Control board
and inlet valve.
CONTROL PANEL
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel fi nish may be damaged by some laundry pre-treatment soil and stain remover products.
Apply such products away from your dryer and wipe up any spills or overspray immediately.
TUMBLER
Remove any stains from the tumbler caused by crayon, ink, fabric dye (from new items such as towels or
jeans) and so on with an all-purpose cleaner.
Tumble old towels or rags to remove any remaining stain or cleaning substance.
Once these steps are followed, stains may still be visible, but should not transfer to subsequent loads.
POWDER COATED TUMBLER
To clean the powder coated tumbler, use a damp cloth with a mild, non-abrasive cleaner suitable easily
marred surfaces.
Remove cleaner residue and dry with a clean cloth.
DRYER EXTERIOR
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects or a detergent box on the dryer. They can scratch or damage the
top cover of the dryer. Keep these items in the separately purchased pedestal or in a separate storage box.
The entire dryer has a high-gloss fi nish. Avoid scratching or damaging the surface when using the dryer.
DRYER EXHAUST SYSTEM
Inspect and clean the dryer exhaust system yearly to maintain optimum performance.
The outside exhaust hood should be cleaned more frequently to ensure proper operation.
03 care and cleaning
WARNING
DV7000H_DC68-03170J-13_EN.indd Sec10:29DV7000H_DC68-03170J-13_EN.indd Sec10:29 3/27/2019 3:03:04 PM3/27/2019 3:03:04 PM
Loading ...
Loading ...
Loading ...