Loading ...
Loading ...
Loading ...
34 SMART FUNCTIONS
Product Registration and Wi-Fi Setup
1
Run the LG Smart Laundry & DW application on
a smart phone.
2
Select Smart Appliance.
3
Select Washer.
4
Select Front Load.
• If you see a pop-up message about NFC,
press the Cancel button.
5
Press the Wi-Fi model button at the bottom of
the screen.
6
Enter the email ID and password you registered.
If you don’t have an account at http://
us.smartthinQ.com, press the Create an
account button and create a user ID and
password.
7
Select the Login button.
8
On the next page, the application shows the Wi-
Fi network list. Select your home network. If your
network requires a key, enter the password and
select the Connect button.
9
If the application successfully connects to the
home network, turn on the washer and then
press and hold the Wi-Fi Connect button on the
washer for three seconds.
After powering on the washer, do not press any
other buttons before pressing and holding the
Wi-Fi Connect button. The Wi-Fi connection
indicator on the washer blinks to indicate the
machine is connecting.
10
The application now works to connect the
appliance and register it as a Wi-Fi product.
A notication appears when the washer is
successfully set up and the product registration
and Wi-Fi setup is complete. The Wi-Fi
connection indicator illuminates when the
machine connects to the home network.
NOTE
• LG electronics is not responsible for any network
connection problems or any faults, malfunctions, or
errors caused by network connection.
• The machine supports 2.4 GHz Wi-Fi networks
only.
• Use the Settings menu in the application to register
or change the machine. Select Settings > Change
Product > Add Product and then follow steps 2–10
above.
• If the router or the router’s password is changed,
select Settings > Change Product > Add Product
and then follow steps 2–10 above.
• If the appliance is having trouble connecting to the
Wi-Fi network, it may be too far from the router.
Purchase a Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
• The network connection may not work properly
depending on the Internet service provider.
• The surrounding wireless environment can make
the wireless network service run slowly.
• This information is current at the time of
publication. The application is subject to change for
product improvement purposes without notice to
users.
Smart ThinQ™
Remote Start
Use a smart phone to control the appliance remotely.
Or monitor the cycle operation to see the remaining
time left in the cycle.
NOTE
• You must rst connect to a gateway and register
the appliance in order to use the Remote Start.
• The Remote LED on the control panel should be
illuminated.
Loading ...
Loading ...
Loading ...