Loading ...
Loading ...
Loading ...
21
Water runs from
the appliance.
The water connection hose is not properly
sealed.
Replace the hose with a manufacturer’s original
part.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure
and damage to the appliance.
The water pressure
is less than usual.
Low water pressure. The water pressure must be between 1.7 bar
and 10 bar so that the appliance works properly.
Shut off tap incorrectly opened. Open shut off tap fully and check for leaks.
Check the minimum through flow.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure
and damage to the appliance.
Water supply has kinks. Turn off the water supply at the shut-off tap.
Smoothen out the kinks, exchange where
necessary.
The water filter is bunged up or used. Change the water filter.
The discharged
water is not cold.
The appliance is newly set up. The water in the tank needs approx.12 hours
to cool down.
The water in the tank is exposed.
The water has stood for a long period in the
pipes outside of the tank and has adapted to the
room temperature.
Throw the first glass of water away.
The water appears
cloudy.
There is air or air bubbles in the water. This is normal when using the dispenser for
the first time. It disappears after a short time.
Particles float in the
water or ice cubes.
The first water which runs through the filter can
rinse carbon dust out of the filter.
The particles are not harmful! These particles
disappear after a short period.
If water freezes and thaws again, particles are
formed by mineral deposits.
The particles are not harmful! In the water supply
this is a natural occurrence.
Fault Possible cause: Remedial action
Loading ...
Loading ...
Loading ...