Loading ...
Loading ...
Loading ...
E-7
press and hold the PTT button and adjust the gain levels with the
Channel Selector knob. (Levels 1 - 5). The LED will stay on for 5
seconds after adjusted.
MIC Gain: Adjusts microphone gain. Delivers up to 100%
modulation. With MIC Gain active, press and hold the PTT button
and adjust the gain levels with the Channel Selector knob.
(Levels 1 - 4). The LED will stay on for 5 seconds after you release
the PTT button.
Weather: Press to toggle between Weather and CB channels. Turn
Channel Selector to cycle through the 7 weather channels. (LED
o = CB channels; LED on = Weather channels).
Press and hold to turn Weather Alert on and o. ALERT displays.
6. Channel Selector/MENU/OK. Press the inner MENU/OK button to
select a menu option or other selection. Turn the outer Channel
Selector knob to:
Select channels.
Select Night or Day Modes. Press MENU/OK to set up your
preferred day and night mode settings.
Select menu modes.
Change scan resume direction (up or down).
Control Talkback volume.
Control RF gain.
Control Mic gain level.
All channels except Channel 9 may be used for normal communication. The
FCC reserves Channel 9 for emergencies involving the immediate safety of
individuals or protection of property. Use Channel 9 to render assistance to
a motorist. This is an FCC rule and applies to all CB operators.
7. Microphone socket.
8. Indicators turn on when the function is turned on.
9. S/RF/CAL/SWR: Press to check RF signal strength, calibration, and
SWR reading.
10. CB/PA: Selects CB (Citizens Band) or PA (Public Address).
Do not use the PA function unless an external speaker is connected.
Loading ...
Loading ...
Loading ...