Loading ...
Loading ...
Loading ...
E-11
2. Plug a 4-pin microphone connector into the 4-pin side of the
adapter.
MARINE INSTALLATION
Consult your dealer for information regarding marine installation. It is
important to adequately ground the system and to prevent electrolysis
between the fittings in the hull and the water.
USING YOUR BEARCAT 980 SSB
CB MODE
Be sure that the power source, antenna, and microphone are properly
connected before proceeding.
BASIC SETTINGS
1. Turn unit on. Set volume to a comfortable level.
2. Select channel.
3. Set noise limitations as desired (ANL or NB or both).
4. Adjust Squelch.
• Turn SQUELCH fully clockwise to receive strong signals.
• Turn SQUELCH fully counterclockwise until you hear a hiss. All
get through — noise, weak signals, and strong signals.
• Turn SQUELCH back clockwise until the hiss stops. Only
clearer signals get through.
Set SQUELCH only when the radio is not receiving a strong signal.
5. Press RF Gain to set RF gain.
6. Press MIC Gain then press PTT and turn the main control to
adjust microphone sensitivity, up to 100% modulation between
1 - 4.
7. Set Backlight color (see page 14).
8. Set LCD Contrast (see page 15).
9. Set Brightness (see page 15).
Loading ...
Loading ...
Loading ...