Loading ...
Loading ...
Loading ...
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
The digital clock (in the audio unit) displays time
when the ignition switch is in the ACC or ON
position. The clock ON or OFF mode can be
selected. For details of the digital clock in the
INTEGRATED CONTROL SYSTEM, refer to
“Clock Time Setting” (P.2-23). For details of
the digital clock in the NAVIGATION SYSTEM,
refer to “Clock” (P.4-7).
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.
SIC4131
ADJUSTING THE TIME
Push the CLOCK button
*
1
to turn the clock on
or off.
1. Push and hold the CLOCK button
*
1
until
the clock display starts to flash.
2. Push the SEEK/TRACK button
*
2
to adjust
the hours.
3. Push the TUNE/FF·REW button
*
3
to
adjust the minutes.
4. Push the CLOCK button
*
1
again to exit
the clock set mode.
The display will return to the regular clock
display after 5 seconds.
Instruments and controls 2-41
CLOCK (if so equipped)
Loading ...
Loading ...
Loading ...