Loading ...
Loading ...
E-1
•
IMPORTANT SAFETY INSTRUCTIONS
....E-1
• PART NAMES...........................................E-3
• SETTING DEODORANT DUST
COLLECTING FILTER..............................E-5
• USING THE REMOTE CONTROL............E-6
• BASIC OPERATION .................................E-8
•
ADJUSTING THE AIR FLOW DIRECTION .....
E-10
• PROGRESSIVE AIRFLOW.......................E-11
• FULL POWER OPERATION.....................E-11
• PLASMACLUSTER OPERATION.............E-12
CONTENTS
• 10°C OPERATION....................................E-12
• SELF CLEAN OPERATION ......................E-13
• ONE-HOUR OFF TIMER ..........................E-13
• TIMER OPERATION.................................E-14
• AUXILIARY MODE....................................E-16
• MAINTENANCE........................................E-16
•
ADDITIONAL NOTES ON OPERATION .........
E-18
• TIPS ON SAVING ENERGY.....................E-18
• BEFORE CALLING FOR SERVICE..........E-19
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations.
Improper
cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.
8
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.
WARNINGS FOR INSTALLATION/REMOVAL/REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.
IMPORTANT SAFETY INSTRUCTIONS
Loading ...
Loading ...
Loading ...