Loading ...
Loading ...
Loading ...
Rinse aid
This product makes dishes sparkle and helps them to dry without spotting.
The dispenser is located on the inside panel of the door.
When the low rinse aid indicator lights up on the control panel (see Fig.A),
you must add rinse aid.
Adding rinse aid
Regardless of the type of detergent dispenser installed on your appliance,
you must proceed as indicated below when loading the rinse aid.
To open the dispenser, turn the cap "2" in an anti-clockwise direction (see
Fig.B) and then pour in the rinse aid, making sure not to overll. The amount
of rinse aid used for each cycle can be regulated by turning the dose
adjustor "3", located beneath the cap "2", with a screwdriver. There are 6
different settings; the normal dosage setting is 3.
How to ll the rinse aid container
H
Important
Correct dosage of rinse aid improves drying. If drops of water remain on the dishes
or spotting occurs, the dosage adjustor should be turned to a higher setting. If the
dishes have white streaks, turn the dosage adjustor to a lower setting.
2
3
Fig.A
Fig.B
12
en
Loading ...
Loading ...
Loading ...