Loading ...
Loading ...
Loading ...
7
Installing the SSD in a notebook:
1. Turn o the power of the notebook, remove the power cable from the power
socket and remove the battery of the notebook. Then push the on/o button
3 times to remove all remaining voltage from the device.
2. Check the notebook manufacturer’s instructions on how to remove the note
book’s casing and the location of the SATA connectors in the notebook. Please
be aware that you might need to copy your operating system to the new SSD
while replacing your current disk.
3. To remove the old disk, please refer to the user manual of the notebook
manufacturer for more instructions. If removal of battery is necessary,
please follow the notebook manufacturer ‘s instructions carefully.
4. Place the SSD at the location of the old disk or the location indicated in the
user manual of the notebook manufacturer, reinstall the battery if necessary.
Then connect the notebook to a power source and turn on the notebook.
For more information about warranty and support, please visit
www.philips.com/support
Loading ...
Loading ...
Loading ...