Loading ...
Loading ...
Loading ...
en
16
Ice maker
Fig. 8
1. Take out water container and fill with
water up to the mark.
2. Carefully empty water into the storage
container via the filler opening. Ensure
that the water does not run into or
splash onto the storage container.
Otherwise, ice cubes could freeze
to each other or to the container.
3. When the ice cubes are frozen,
press lever down and release.
The ice cubes loosen and fall into
the storage container.
4. Remove ice cubes from the storage
container. The ice cubes should be
removed regularly from the storage
container to prevent them from
freezing to each other.
Drawer for sausage and cheese
Fig. .
The drawer can be removed for adding
and removing food. Lift the drawer
and pull out. The drawer holder
can be adjusted.
Sticker “OK”
(not all models)
The “OK” temperature monitor
can be used to determine temperatures
below +4 °C. Gradually reduce
the temperature if the sticker
does not indicate “OK”.
Note
When the appliance is switched on,
it may take 12 hours until
the temperature is reached.
Correct setting
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. 1
Press the On/Off button 12.
Refrigerating unit and light switch off.
Disconnecting the appliance
If you do not use the appliance
for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
Defrosting
Refrigerator compartment
Defrosting is actuated automatically.
The condensation runs through
the drainage hole into an evaporation
pan on the rear of the appliance.
Freezer compartment
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
Loading ...
Loading ...
Loading ...