Loading ...
Loading ...
Loading ...
Always follow all safety precautions when
cleaning and servicing the POWER-MATE TM,
WARNING
Electrical Shock Or Personal injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting_
1. Remove light
cover by pressing
in and lifting both
sides as shown.
Push In
And Turn
2. Push in and turn
bulb counterclock-
wise to remove,
3. Replace the bulb
Bulb must not be
higher than I5 Watts°
Close light cover until
it snaps in place°
NOTE: See PARTS AND FEATURES for
Bulb #.
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build-
up frequently in the POWER-MATE TM brush
and brush support areas. If build-up
becomes excessive, disconnect POWER-
MATE TM from wand and follow the steps
below_ Instructions can atso be found under
the light cover.
TO REMOVE BELT:
._ 1. Remove light
cover and light
bulb as shown
under LIGHT
'_ BULB
CHANGING.
_._ 2. Unscrew the
POWER-
MATE TM cover
screws.
3. Turn
POWER-
MATE TM over.
To remove
cover, insert
screwdriver at
cover tabs on
both sides and
twist to
release tabs
Quick
Release
4. Turn POWER-
MATE TM right
side up. Press
handle release
pedal and lower
the swivel° Tilt
cover forward
from back until
front snaps free.
14
Loading ...
Loading ...
Loading ...