Loading ...
Loading ...
Loading ...
2
2.1 Location
When selecting a position for your unit you should make sure the floor is flat and firm, and
the room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or
radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme
cold ambient temperatures may also cause the unit not to perform properly. This unit is not
designed for use in an outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 40 cm of free space is left at both sides, 15 cm at the
rear and 20 cm at the top of the unit. This will allow cold air to circulate around the wine
cooler and improve the efficiency of the cooling process. The door can be opened to the right
or the left, depending on what better suits the location. Please ensure there is adequate space
for the door to fully open.
2.2 Reversing the Door Swing
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
Ensure the unit is unplugged and empty.
Adjust the two levelling feet to their highest position.
To take the door of it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit fat as this may damage the coolant system.
We recommend that 2 people handle the unit during assembly.
1) Start by removing the bracket from the bottom of the refrigerator.Unscrew the two screws
from the bottom bracket.Remove the foot from opposite side.
2) Self-Tapping Screws/Bottom Bracket/Foot .
Loading ...
Loading ...
Loading ...