Loading ...
Loading ...
Loading ...
Typical Under Counter Installation of an Electric Built-in
Oven with a Cooktop Mounted Above
Junction box must be located
approx. 3" to the left of the
built-in oven cutout.
All mounting hardware
must be used to secure
the built-in oven to the
cabinets. Refer to the
built-in oven installa-
tion instructions.
This cooktop may be in-
stalled over certain built-
in electric oven models.
Side filler panels are necessary to isolate
the unit from adjoining cabinets. Panel
height should allow for installation of ap-
proved cooktop models. See"Typical
Gas Cooktop Installation Over an Electric
Built-in Oven Installed Under the
Counter" on
208/240 Volt grounded
junction box for
oven.
Use 3/4" plywood, installed on two
runners, flush with toe plate. Must
be capable of supporting 150 Ibs.
1/2" Max.*
in wood base minimum 9" x 9",
2" from left side filler panel, to route armoured
cable to junction box.
* If no cooktop is installed directly over
the oven unit, 5" maximum is allowed.
** 32" min. from top of cabinet to top of
runners must be maintained.
CUTOUT DIMENSIONS (inches)
OVEN SIZE E F G
Min. Max. Min. Max.
30" 27 ¼" -27 V16" 28 V2" - 28 V8" 23 ¼"
27" 27s/8" - 28 118" 25" - 25 ¼" 23 ¼"
5
Loading ...
Loading ...
Loading ...