User Manual LG 43UM7300PUA 43" Class 4K Smart UHD TV w/AI T

LG 43UM7300PUA 43" Class 4K Smart UHD TV w/AI ThinQ® (42.5'' Diag) - Use Manual - Use Guide PDF.
Documents: Go to download!

Owner's manual - (English)

Table of contents

Preparing
Optional Extras
Lifting and moving the TV
Mounting on the Table
Mounting to the Wall
Connections
Using Button
Troubleshooting
Specifications

USER MANUAL LED TV

Preparing

When the TV is turned on for the first time after being shipped from the factory, initialization of theTV may take approximately one minute.
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are using.
New features may be added to thisTV in the future.
The device must be easily accessed to a location outlet near the access.Some devices are not made by turning on /off button, turning off the device and unplugging the power cord
The items supplied with your product may vary depending upon the model.
Product specifications or contents of this manual maybe changed without prior notice due to upgrade of product functions.
Foran optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39inches) thick and18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cableor USB flash drive does not fit into your TV’s USB port.
Use a certifiedcable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur
Recommended HDMI cable types (3 m (9.84 feet) or less)

- Ultra High-Speed HDMI cable®/TM

Optional Extras

Optional extras can be changed or moifid for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain model
The model name or design may be changed due tothe manufacturers circumstances or polices.

Wall Mounting Bracket (Dependingupon model)

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions forthe wall mount kits are described in. the following table.

Lifting and moving the TV

When moving oriftng the TV. read the following o prevent the TV from being scratched or damaged and for safe transportation regardless ofits type andsize.

It is recommended to move the TV in the box or packing material that the TV originally came in
Before moving o iting the T. disconnect the power cord and allables.
When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part. speaker. or speaker gril area

Use atleast two people to move a largeTV.
When transporting theTV by hand. hold the TV as shown inthe following ilustration.

When transporting theTV. do not expose the TV t jolts or excessive vibration
When transporting theTV. keep the TV upright; never turn the TV on its side or tt towards the left or right.
When handling the TV. be careful nt to damage the protruding buttons.

Mounting on the Table

Lift and tit the TV intoits upright positon on a table. Leave a minimum of 10 cm (4 inches) space from the wal for proper ventilation
Connect the power cord to a wall outlet.

Warning

Do not apply foreign substances (ols. lubricants etc.) to the stew parts when assembling the product. (Ooing so may damage the product)
If you install the TV on a stand. you need to take actions to prevent the product from overturning. Otherwise. the product may fll over. which may cause injury.
Do not use any unapproved items to ensure the safety and product life span.
Any damage or injuries caused by using unapproved items are not covered by the warranty.
Make sue that the screws are fastened tightly. (iFthey are not fastened securely enough the TV may tit forward after being installed)
Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

Insert and tighten the eye-bolts. or TV brackets and bolts on the back of the TV. Ift here are bots inserted at the eye-bolts positon. remove the bolts fist
Mount the wal brackets with the bolts to the wal. Match the location of the wall bracket and the eye-bots on the rear of the TV.
Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the fat surface.

Use a platform or cabinet thats trong and large enough to. support the TV securely.
Brackets bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that support the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building material. please contact qualified personnel to install the wall mount. Detailed instructions will be induded with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mounts easy to adjust orto connect the cables. When you do not use LG‛s wall mount bracket. use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to exteral devices. If you are using a non-adjustable mount. attach the mount to the wall. Attach the cables to the TV fist. then attach the TV to the mount.

Warning

Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
For more information of screws and wall mount bracket. refer tothe Separate purchase
If you intend to mount the product to a wall. attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts). fix it carefully so as not to drop.
When mounting aTV onthe wall. make sue not to install theTV by hanging the power and signal cables onthe backof theTV.
Do not install this product ona wall fit could be exposed to oil oil mist .This may damage the product and cause it to fall
When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model).

Connections

You can connect various external devices to theTV. For more information on external device’s connection, refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable,or cable box to watch TV while referring to the following.The illustrations may differ from the actual items and an RFcable is optional.

Make sure not to bend the copper wire of the RFcable

Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
Use a signal splitter to use 2 TVs or more.
DTV Audio Supported Codec: MPEG, Dolby Digital
ThisTV cannot receive ULTRA HD (3840x2160 pixels)broadcasts directly because the related standards have not been confirmed.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

HDMI

When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
HDMI Audio Supported Format: (Depending upon model)
- DTS(44.1kHz /48kHz /88.2kHz /96kHz),
- DTS HD (44.1kHz /48kHz /88.2kHz /96kHz /176.4kHz /192 kHz),
- True HD (48kHz),
- Dolby Digital / Dolby DigitalPlus (32kHz /44.1kHz /48kHz), PCM (32kHz /44.1kHz /48kHz /96kHz /192kHz)

External Devices

Supported extemal device are: Blu-ray player. HD receivers. DVD players. VCR. audio systems. USB storage devices. PC. gaming device. and other external devices. For more information on extemal device’s connection, refer to the manual provided with each device.

If you record aTV program on aBlu-ay/DVD recorder or VCR. make sure to connect theTV signal input cable to the TV through a DVD recorder orVCR. For more information about recording. refer to the manval provided withthe connected device.
The extermal device connections shown may differ slightly from ilustrationsin a manual
Connect external devices tothe TV regardless about the order of theTV port.
If you connect a gaming device to the TV. use the cable supplied with the gaming device.
Refer tothe external equipments manual for operating instructions.
In PC mode. there may be noise associated with the resolution. vertical patter. contrast or brightness. nose i present. change the PC output to another resolution. change the refresh rate to anather rate or adjust the brightness and contrast on the [PICTURE] menu until the picture is clear. Depending upon the graphics card. some resolution settings may not allow the image to be positioned onthe screen propery.
Some USB Hubs may not work. fa USB device connected through a USB Hub isnot detected. connectit directly to the USB port on theTV.
When connecting via a wired LAN. it isrecommended to usea CAT 7 cable.
The TV may be capable of operating without aset-top-box from a multichannel video programming distributor (MVPD).

Using Button

You can simply operate theTV functions,using the button.

Basic functions

All running apps will close.
You can access and adjust the menu by pressing the button when TV is on.
You can use the function when you access menu control.

Adjusting the menu

When theTV is turned on, press the button one time.You can adjust the Menu items using the button.

Troubleshooting

Can not control the TV with the remote control.

Check if anything such as tape has been placed over the receiver.
Check if there is any obstacle between the product and the remote control.
Replace the batteries with new fresh ones

No image display and no sound is produced.

Check if the products turned on
Check if the power cordis connected to a wall outlet.
Check if there is a problem inthe wall outlet by connecting other products

TheTV turns offsuddenly.

Check the power contro settings. The power supply may be interrupted.
Check if the auto-off function is activated in the settings menu.
lf there is no signal while the TVs on. the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display

If the TV feels cold to the touch there may bea smal fcker when itis tured on. Thisis normal; there isnthing wrong with TV. Some minute dot defects may be visible on the screen. appearing as tiny red. green. or blue spots. However. they have no adverse effecton the TV performance. Avoid touching the LCD screen or holding your fingers) against it for long periods of time Doing so may produce some temporary distortion effects on the screen.
This panel is an advanced product that contains millions of pixels. In a very few cases. you could see fine dots on the sreen while you viewing the TV. Those dots are deactivated pixel and do not affect the performance and reliability of the TV.
Displaying a stil image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity This noises common for products here thermal deformation is required.
Electrical circuit humming/panel buzzing A low level no is generated from a high-speed switching circuit. which supplies large amount of curent to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Warning

When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel, (Depending upon model).

Make sure to wring any excess water or cleaner from the cloth.
Do not spray water or cleaner directly onto theTV screen.
Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Specifications

Produc specifications may be changed without prior notice due to upgrade of product functions.
Estimated yearly energy consumption indicated on the FTC label fs measured in accordance with the Test Procedures for Television Sets (USA ony).
The actual energy consumption depends on the usage environment (The content watched TV setting. etc).

(Depending upon country)