Loading ...
Loading ...
Loading ...
User Manual\07
Installation Instructions
\
It’s important to carefully read the following installation instructions before beginning the installation of your oven.
Important installation safety notes: – Always switch the power o prior to beginning the installation.
– Stainless steel is very easily damaged during installation. Wherever possible,
protect the rangehood with the cardboard box or plastic wrap during the
installation.
– For safety reasons, this Rangehood must be earthed.
– A power point must be located within 1.5m of the power cord exit from the
rangehood, and it should be always accessible to allow isolation from power
during cleaning or maintenance.
– A 150mm round ducting adapter is supplied, however all other ducting
accessories are not.
– All ducting must comply with building codes and local requirements.
– If you are re-circulating the air, rather than ducting, please ensure that
the side outlet grilles are not obstructed in any way as this will eect the
eciency of the rangehood.
– Ensure that the rangehood is mounted in a level position, both horizontally
and vertically. This is essential to ensure the rangehood operates correctly
and prevents grease build up at one end.
Ducting options Before beginning the installation of your rangehood, the method of ducting
should be considered and selected. The guide below illustrates the various
ducting options.
Note: This rangehood can be operated in recirculation mode
where required, although Residentia Group recommends
to duct wherever possible.
1. Into your ceiling cavity and then vented through your eaves.
2. Straight up and through your tiled or metal roof.
Loading ...
Loading ...
Loading ...