User Manual Sharp LC-43LB601U 43" Class (42.5" diag.) FHD Sharp Roku TV

Sharp LC-43LB601U 43" Class (42.5" diag.) FHD Sharp Roku TV - Use Manual - Use Guide PDF.
Documents: Go to download!
User Manual
  • User Manual - (English)
  • Quick Start Guide LC 43LB601U - (English)
Specification
  • Spec Sheet LC 43LB601U - (English)



User manual Television

TV components

Your TV has built-in controls for adjusting basic settings and several sets of jacks for connecting devices to your TV. This section contains information about:

• Package contents

• Front features

• Side jacks

• Back jacks

• Remote control

Package contents

• 43" or 50" LED Sharp Roku TV
• Remote control and batteries (2 AAA)
• TV stands (2)
• Screws (4)
• Power cord
• Quick Setup Guide
• Important Information
• Roku TV End User License Agreement (EULA)

Front features

Besides the viewing screen, the front has a remote control sensor, to receive the signals from the remote control (do not block), and a status indicator.

The status indicator lights red when your TV is off, turns off when your TV is on, or blinks when receiving commands from the remote control.

Side jacks

#

Item

Description

1

RESETPress and hold reset for 15 seconds for factory reset.

2

(headphones)Connect headphones to this jack. See Connecting headphones on page 28.

3

USBConnect a USB flash drive to this jack to view compatible photos and video, listen to music files, or pause live TV. For more information, see Connecting a USB flash drive on page 27 and Pause live TV on page 7.

4

HDMI3Connect HDMI® devices to this jack. For more information, see HDMI® (best) on pages 18, 22, or 24 or Connecting a computer on page 26.

5

DIGITAL OUTPUT (OPTICAL)Connect a digital sound bar, speaker system, or home theater system to this jack to listen to TV audio through external speakers. For more information, see Digital audio using the DIGITAL OUTPUT (OPTICAL) jack on page 29.

Back jacks

#

Item

Description

1

VIDEO/ L and R AUDIOConnect an AV device to these jacks. For more information, see AV (good) on page 19, 23, or 25.

2

HDMI1(ARC)/ HDMI2

Connect HDMI® devices to these jacks. For more information, see HDMI® (best) on pages 18, 22, or 24 or Connecting a computer on page 26.

Connect an ARC-enabled home theater receiver to the HDMI1(ARC) jack. For more information, see Digital audio using the HDMI1(ARC) jack on page 30.

3

AUDIO OUTConnect an analog soundbar, speaker system, or home theater system to this jack to listen to TV audio through external speakers. For more information, see Analog audio using the AUDIO OUT jack on page 31.

4

ANT/CABLEConnect an antenna or cable TV to this jack. For more information, see Coaxial (good) on page 20 or Connecting an antenna or cable TV (no box) on page 21.

5

/INPUT

—Press to turn your TV on or off (standby mode). Press and hold to turn off your TV when TV is on.

Warning: When your TV is off, power still flows through it. To completely disconnect power, unplug the power cord.

INPUT—When your TV is on, quickly press and release to open the INPUT SOURCE list, press one or more times to select a video input source, then wait a few seconds. Your TV switches to the source you selected.

TV menu—Press to confirm selections.

Remote control

#

Item

Description

1

(power)Turns your TV on or off

2

← (back)

The action depends on what you are doing with your TV:

Menu—Goes back to the previous menu or screen.

Home screen tile—Moves the highlight back to the

Home menu option.

Watching Antenna TV or a TV input—Returns to the screen from which the input was selected.

Playing streaming content—Stops playing stream and returns to the previous menu or screen.

Browsing streaming content—Goes to the previous level in the content tree.

3

∧ ∨ < > and OK

∧/∨ —Moves the highlight up or down one item.

< —Moves the highlight left, if a < hint appears.

• When watching TV, displays your channel list.

• When playing most streaming videos, skips backward in the video.

> —Moves the highlight to the right, if a > hint appears.

• When watching TV with the channel list displayed, dismisses the channel list.

• When playing most streaming videos, skips forward in the video.

OK—Selects the highlighted option.

• When watching TV, displays information for the current TV program.

4

(previous)

Watching Antenna TV or cable (no set-top box)—Changes to the previous channel.

Playing streaming content—Jumps back one position in video.

Menu—Backspaces one letter during menu entries, such as Search.

5

(sleep)First press displays a banner showing the remaining sleep time, if any, or Sleep timer is off. Subsequent presses cycle among the preset sleep time intervals: 30 minutes, 1 hour, 1.5 hours, 2 hours, and 3 hours. After it is set, the Sleep timer remains in effect regardless of what you are watching.

6

(rewind)

When playing streaming video that supports this feature or broadcast TV if Live TV Pause is enabled, cycles through 1×, 2×, and 3× rewind speeds.

When playing streaming audio, jumps to the previous track/selection.

When any menu, tile, or channel in the channel list is highlighted, jumps up one page.

When using a virtual keyboard, jumps to the character at the top of the current column.

7

(play/pause)Pauses and plays streaming content.

8

(home)Immediately returns to the Home screen and stops playback if you are watching TV or streaming content.

9

(options)

Displays an Options menu, but only when the Options hint in the upper right corner of the screen is not dimmed. The menu you see varies depending on what you are doing with your TV.

Also, in most cases, pressing while video is playing displays an Options menu over part of the screen where you can adjust various picture and sound settings.

10

(fast forward)

When playing streaming video that supports this feature or broadcast TV if Live TV Pause is enabled, cycles through 1×, 2×, and 3× fast-forward speeds.

When playing streaming audio, jumps to the next track/selection.

When any menu, tile, or channel in the channel list is highlighted, jumps down one page.

When using a virtual keyboard, jumps to the character at the bottom of the current column.

11

Streaming Channels Shortcuts

Dedicated buttons show the logo of a featured streaming content provider. Pressing a button turns your TV on (if your TV is not already on), and if your TV is operating and is connected to the Internet, performs one of the following actions:

• Displays the streaming channel's main page if you have already added the channel to your Home screen.

• Displays the streaming channel's sign-up page if you have not already added the channel so that you can agree to any terms and fees for the service.

12

(volume up)

Turns the volume up one setting with each press. Press and hold to turn the volume up rapidly. A volume indicator shows the volume level while you are adjusting the volume and for a few seconds afterward.

Note: If your TV is muted, pressing unmutes the sound.

13

(volume down)

Turns the volume down one setting with each press. Press and hold to turn the volume down rapidly. A volume indicator shows the volume level while you are adjusting the volume and for a few seconds afterward.

Note: If your TV is muted, pressing does not unmute the sound.

14

(mute)Mutes and unmutes the TV sound. A volume indicator shows the current volume level and a mute icon when you press and for a few seconds afterward. If Closed captioning is set to When Mute, captions are displayed while your TV is muted.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 17.

You can connect your cable or satellite box using:

• HDMI® (best)
• AV (good)
• Coaxial (good)

HDMI® (best)

Note For better picture quality, we recommend that you use cables designated as High Speed HDMI® cables.

  1. Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
  2. Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
  3. Connect an HDMI® cable (not provided) to an HDMI jack on side or back of your TV and to the HDMI OUT jack on the cable or satellite box.
  4. Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
  5. On the Home screen, press ∧ ∨ < or > to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.

Note An HDMI® cable carries both audio and video. You do not need to use any audio cables.

AV (good)

Notes Cables are often color-coded to match color-coded jacks.

  1. Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
  2. Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
  3. Connect an AV cable (not provided) to the VIDEO jack and L and R AUDIO jacks on the back of your TV and to the AV and audio out jacks on the cable or satellite box.
  4. Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
  5. On the Home screen, press ∧ ∨ < or > to highlight the AV tile, then press OK.

Coaxial (good)

  1. Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
  2. Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
  3. Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box.
  4. Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
  5. On the Home screen, press ∧ ∨ < or > to highlight the Antenna TV tile, then press OK. If you have not set up the TV tuner, follow the on-screeen instructions.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

Connecting a game console

Many game consoles have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 17.

You can connect a game console using:

• HDMI® (best)
• AV (good)

HDMI® (best)

Note For better picture quality, we recommend that you use cables designated as High Speed HDMI® cables.

  1. Make sure that your TV’s power cord is unplugged and the game console is turned off.
  2. Connect an HDMI® cable (not provided) to an HDMI jack on the side or back of your TV and to the HDMI OUT jack on the game console.
  3. Plug your TV’s power cord into a power outlet, then turn on your TV and the game console.
  4. On the Home screen, press ∧ ∨ < or > to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.

Note An HDMI® cable carries both audio and video. You do not need to use any audio cables.

AV (good)

Note Cables are often color-coded to match color-coded jacks.

  1. Make sure that your TV’s power cord is unplugged and the game console is turned off.
  2. Connect the game console’s AV cable (not provided) to the VIDEO jack and L and R AUDIO jacks on the back of your TV and to the AV jack(s) on the game console.
  3. Plug your TV’s power cord into a power outlet, then turn on your TV and the game console.
  4. On the Home screen, press ∧ ∨ < or > to highlight the AV tile, then press OK.

Connecting a computer

You can use an HDMI® jack on your TV to connect to a computer.

Note For better picture quality, we recommend that you use cables designated as High Speed HDMI® cables.

  1. Make sure that your TV’s power cord is unplugged and the computer is turned off.
  2. Connect an HDMI® cable (not provided) to an HDMI jack on the side or back of your TV and to the HDMI OUT jack on the computer.
  3. Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
  4. On the Home screen, press ∧ ∨ < or > to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
  5. Adjust the display properties on the computer, if necessary.

Connecting a USB flash drive

When you connect a USB flash drive to the USB jack on your TV, you can view photos and videos or listen to music stored on the drive or you can use the Live TV Pause feature to pause live TV for up to 90 minutes.

  1. Plug a USB flash drive into the USB port on the side of your TV.
  2. Press ∧ or ∨ to highlight the Roku Media Player or USB Media Player tile, then press OK.

Connecting headphones

When you connect headphones, your TV speakers are muted and sound only plays through the headphones.

Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.

• Connect the headphones to the jack on the side of your TV.

Note You can also connect a home theater system, sound bar, or external speaker system to the jack.

Connecting power

You should connect devices before you connect the power cord. When you are adding devices, make sure that the power cord is unplugged from the power outlet.

  1. Connect the power cord to the power connector on the back of your TV.
  2. Connect the other end of the cord to a power outlet.

Caution

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.

Installing remote control batteries

Open the back of your TV remote control and insert two AAA batteries, observing the proper orientation. Reattach the back cover.

Remote control on page 15 explains how to use the remote control in each of your TV’s operating modes.

Cautions

• Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.

• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

• Make sure that batteries are disposed of correctly. Do not burn or incinerate.

Notes

• Do not mix batteries of different types.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• If the remote control is not going to be used for an extended period of time, remove the batteries.

Aiming the remote control

• Point the remote control towards the remote sensor on the front of your TV.

Setting up your TV

When you turn on your TV for the first time, Guided Setup starts. During Guided Setup:

• Your TV automatically detects your wireless network, so have your network name and password handy and follow the easy on-screen instructions.

• You’ll be prompted to create your Roku account online at website. Your TV generates a unique code that links your TV to your new account.

Note Roku accounts are free, and while a valid credit card number is not required, providing your card information makes renting and purchasing entertainment a breeze.

• After you are connected to your account, your TV automatically updates with the latest software, and you can start streaming immediately.

Note If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.

Maintaining

• Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.

• Storage temperatures are 5° to 113°F (-15° to 45°C).

• Working temperatures are 41° to 95°F (5° to 35°C).

• Do not place your TV in direct sunlight or near a heat source.

Cleaning your TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Cleaning your TV screen

Clean the screen with a soft, lint-free cloth.

Troubleshooting

Warning Do not try to repair your TV yourself. Contact authorized service personnel.

Note If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

Note If you have any other questions about how to use your TV that are not covered in this User Guide, go to website and select your TV brand and model.

Video and audio

Symptom

Possible cause

Try this...

Picture does not fill the screen or there are black bars around the pictureThe picture size may need to be adjustedAdjust the picture size (aspect ratio). See the Picture Size option in the Options menu.
I don’t see a picture when I select an inputTV is not onMake sure that your TV is plugged into a working power outlet, and that your TV is turned on. (Your TV has a light on the front that indicates if your TV is turned off.)
Cables are not connected correctly

Make sure that the video cables are connected correctly and securely to your TV.

Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.

Picture settings may be incorrect

Adjust the contrast and brightness. See the TV brightness option in the Settings menu or Options menu.

Adjust the TV picture.

Incorrect input may be selectedMake sure that the correct input is selected for the device you want to view.
Input source not detected

Make sure that the device connected to the input is turned on.

Make sure that the cord to and from the device is connected firmly and correctly to the device and your TV.

TV input may be badConnect a different device to the same input and check to see if it works correctly.
TV channel does not appearBroadcast TV may be experiencing problems or may not be set up

Try another channel. The station may be experiencing problems.

Make sure that the incoming signal is compatible.

If you are trying to watch broadcast TV, make sure that Antenna TV is set up.

Dark, poor, or no picture (screen is lit), but sound is goodBroadcast TV may be experiencing problems or may not be set up

Try another channel. The station may be experiencing problems.

If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Cables may not be connected correctly

Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.

Make sure that the video cables are connected correctly and securely to your TV.

The video cable(s) you are using may be bad. Try a new set.

Picture settings may be incorrect

Adjust the brightness. See the TV brightness option in the Settings menu or Options menu.

Change to a different picture mode. See the Picture mode option in the Options menu or Advanced Picture Settings menu.

No color, dark picture, or color is not correctPicture settings may be incorrectAdjust the contrast, color, and brightness settings. See the TV brightness option in the Settings menu or the Options menu.
Broadcast TV may be experiencing problems

Try another channel. The station may be experiencing problems.

If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Cables are not connected correctly

Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.

Make sure that the video cables are connected correctly and securely to your TV.

The video cable(s) you are using may be bad. Try a new set.

Only snow (noise) appears on the screenBroadcast TV may be experiencing problems or may not be set up

Try another channel. The station may be experiencing problems.

If you are trying to watch broadcast TV, make sure that Antenna TV is set up.

If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Cables may not be connected correctlyMake sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.
Picture quality is good on some channels and poor on others. Sound is goodBroadcast signal may be weakIf you connect to cable without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.
Dotted lines or stripes appear on the screenCables may not be connected correctly

Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.

Make sure that the video cables are connected correctly and securely to your TV.

The video cable(s) you are using may be bad. Try a new set.

Broadcast signal may be weak

If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from your TV to eliminate the interference.

Double imagesBroadcast signal may be weak

If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

If you are using an antenna and the signal strength is low, switch to a cable or satellite box.

The picture has a few bright or dark spotsThis is normal in LED TVsA few bright or dark spots on an TV screen is normal. It does not affect the operation of your TV.
Good picture, but no soundVolume is down or muted

Increase the volume.

Make sure that the sound is not muted.

Headphones may be connectedMake sure that you do not have headphones connected. When headphones are connected, no sound comes from your TV speakers.
TV speakers may be turned offIf you want sound to play through your TV speakers, make sure that your TV speakers are turned on.
You may need to change the audio modeChange to a different audio mode.
Home theater system, soundbar, or external speaker system may not be turned on or may not be set up correctly

If you are using a home theater system, soundbar, or external speaker system, make sure that it is turned on and is not muted and that it is set to the correct source.

If you connected an ARC audio device to the HDMI1/ARC jack, make sure that you have turned on the ARC feature.

If you are using a home theater system, soundbar, or external speaker system and have connected it with a digital audio cable, make sure that you have set up the digital audio connection.

Make sure that the audio cables are connected correctly and securely to your TV.

Bad content, no audioMake sure that the selected channel or content is intended to be broadcasting with sound.
Cables may not be connected correctly

Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 18 or Connecting an antenna or cable TV (no box) on page 21.

The audio cables you are using may be bad. Try a new set.

Poor pictureLight in the viewing area may be interferingMake sure that the room is not too bright. Light reflecting off the screen can make the picture difficult to see.
A connected camera or camcorder may be interferingIf an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices.
Audio noiseOther devices may be interferingOther devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from your TV to eliminate the interference.
After images appear Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.

Remote control

My TV doesn’t turn on using the remote controlNo power to TVMake sure that the power cord is correctly connected to both your TV power connector and power outlet. See Connecting power on page 33. You should see an LED in the front of the TV panel when a button on the remote is pressed. If you see no LED activity, try another outlet or check your fuse box.
Line-of-sight obstructedMake sure that no objects (or pets) are obstructing the line-of-sight from the remote control to the remote sensor on the front of your TV. See Aiming the remote control on page 34.
Remote not responding

Open the battery compartment and make sure that the batteries are seated in the correct positions (+ and - in the correct positions). See Installing remote control batteries on page 34.

Make sure that the batteries are fresh and working correctly.

Replace the batteries, if necessary.

TV frozenIf the front LED is not responding, or abnormally bright, disconnect the power cord from the power outlet, wait a few seconds, then reconnect the power cord.
Trouble programming your existing universal remote controlRemote control may not be programmed correctly

For instructions on programing a universal remote control, visit website.

Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.

Batteries may be deadReplace dead batteries with new batteries. Refer to the User Guide that accompanied your universal remote control.

General

No powerPower cord may not be connected correctly

Make sure that the power cord is correctly connected to both your TV power connector and power outlet. See Connecting power on page 33. You should see an LED in the front of your TV panel when a button on the remote is pressed. If you see no LED activity, try another outlet or check your fuse box.

Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV.

Other devices may be interferingOther devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from your TV to eliminate the interference.

My TV tuner does not pick up as many over-the-air

channels as it should

Antenna may not be placed optimally

Adjust the antenna location and rescan.

Go to Settings > TV inputs > Antenna TV > Scan again for channels.

Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider.

Make sure that the antenna or cable/satellite TV is connected securely to your TV.

Try replacing the cable between the antenna/cable or cable/satellite box and your TV.

Broadcast TV may not be set upMake sure that Antenna TV is set up.
One or more channels do not displayChannels may be blocked or hidden

Make sure that the channels are not blocked.

Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can add the channel back to the channel list.

The wrong input may be selectedMake sure that you have selected the correct input tile for the device or service you are trying to use.
You may need to use the remote control that came with the cable or satellite boxIf you are using a cable or satellite box, use the remote that came with that box to change channels.

I lost my

parental control

PIN

Need PIN recovery

You will need to factory reset your TV, as the PIN cannot be recovered or reset any other way.

Go to Settings > System > Advanced system settings > Factory reset.

Some settings cannot be accessedNot all settings are available for all devices or inputsIf the icon or a menu option is grayed, you cannot adjust settings for the current video input mode.
TV cabinet creaksThis is normalWhen your TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.
Control buttons do not workTV may be frozenUnplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
TV keeps turning offSleep timer may be turned onMake sure that the sleep timer is not turned on.
SymptomPossible causeTry this...
Some features are not availableThe wrong TV mode may be selected

You may have Set up for store mode when you set up your TV. Store use mode is for retail environments only. In Store use mode, some of your TV’s features are missing or limited. If you selected Set up for store use and you want to change to Set up for home use, you have to reset your TV to the factory defaults.

Go to Settings > System > Advanced system settings > Factory reset.

Roku

How can I find out more about using my TV? If you need help with using your TV or Roku, go to: website

I can’t turn my

TV on with the Roku mobile app

Your TV is “asleep”You will need to use the physical remote button to “wake up” or turn on your TV.

I can’t find my

TV with the Roku mobile app

TV and mobile app not on same wireless networkMake sure that your TV and the mobile app are on the same network.
TV not powered or working normallyMake sure that your TV is connected to a working power outlet and that your TV is turned on. See Connecting power on page 33.

Network

I cannot connect to the

Internet

Network connection may not be set upIf you did not connect to the Internet when you first set up your TV, set up a network connection.
Network name or password may have changedIf your network name or password has changed, you need to update your network connection.
Streaming keeps pausing to load more dataWireless LAN not optimized

Rotate wireless router slightly

Elevate the router

Turn off other wireless connections

Use 5.0Ghz, if possible. Roku TVs support dual band.

Insufficient broadband speedTurn off other wireless connections that may also be using bandwidth.

CEC - compatible devices

My TV is not displaying the video from the connected CEC deviceCables may not be connected correctly

Make sure that the HDMI® cable is connected securely to your TV and the device.

Make sure that the device is connected to your TV with an HDMI® cable.

Picture settings may be incorrectTry adjusting your TV picture.
The selected input may be incorrectMake sure that the correct input tile is selected.
Connected device may not be a CEC deviceMake sure that the device is a CEC device. See the documentation that came with the device for more information.
CEC control may not be set up correctlyMake sure that your TV has searched for CEC devices.
My TV is not playing the audio from the connected CEC device.Cables may not be connected correctlyMake sure that the HDMI® cable is connected securely to your TV and the device.
Volume may be too low or mutedMake sure that the volume on your TV and the device is turned up and not muted.
TV speakers may be turned offIf you want sound to play through your TV speakers, make sure that your TV speakers are turned on.
Connected device may not be a CEC deviceMake sure that the device is a CEC device. See the documentation that came with the device.
CEC control may not be set up correctlyMake sure that your TV has searched for CEC devices.
Connected audio device may not be set up correctly

If you are using a home theater system, soundbar, or external speaker system, make sure that it is set to the correct source.

If you are using a home theater system, soundbar, or external speaker system and have connected it with a digital audio cable, make sure that you have set up digital audio.

If you connected an ARC audio device to the HDMI1/ARC jack, make sure that you have turned on the ARC feature.

My TV’s remote control does not control the deviceConnected device may not be turned onMake sure that the device is turned on.
Line-of-sight obstructedMake sure that no objects (or pets) are obstructing the line-of-sight from the remote control to the remote sensor on the front of your TV and the device.

Connected device may not support some or all

CEC features

Depending on the device, all the buttons may not work.

The device may not support this feature. See the documentation that came with the device for more information.

CEC control may not be set up correctly

Make sure that your TV has searched for CEC devices.

If you are trying to control the volume on an HDMI® CEC audio receiver using your TV remote control, make sure that your TV speakers are turned on.

If you are trying to control the volume on an HDMI® CEC audio receiver using your TV remote control, make sure that the system audio control is turned on.

The device does not show up in the CEC device

list

Connected device may not be a CEC deviceMake sure that the device is a CEC device. See the documentation that came with the device.
Cables may not be connected correctly

Make sure that the HDMI® cable is connected securely to your TV and the device.

Make sure that the device is connected to your TV with an HDMI® cable.

CEC control may not be set up correctlyMake sure that your TV has searched for CEC devices.

My device does not turn off

when I turn off my TV

Connected device may not be a CEC deviceMake sure that the device is a CEC device. See the documentation that came with the device.
Connected device may not support some or all CEC featuresThe device may not support this feature. See the documentation that came with the device for more information.
CEC control may not be set up correctly

Make sure that your TV has searched for CEC devices.

Make sure that system standby is turned on.

My TV does not turn on when I turn on my deviceConnected device may not be a CEC deviceMake sure that the device is a CEC device. See the documentation that came with the device.
Connected device may not support some or all CEC featuresThe device may not support this feature. See the documentation that came with the device for more information.
CEC control may not be set up correctly

Make sure that your TV has searched for CEC devices.

Make sure that 1-touch play is turned on.



See other models: LC-43LBU591U 43Q7000U 60Q7370 LC-43LB601C LC-50Q620U

Sharp LC-43LB601U | File type: PDF | Filename: Sharp LC-43LB601U 43" Class (42.5" diag.) FHD Sharp Roku TV.pdf | Size: 2.81 MB | Language: English | Other documents: 2 files.

Download User Manual

Product Infomation and Reviews - LC-43LB601U photo

LC 43LB601U Photo

Sharp in United States

1-800-237-4277 (1-800-BE-SHARP)