#2 How do I use the control panel on my Laundry U washing machine?
Power
Tap to turn the washing machine on and off.
If you do not use the control panel for 10 minutes after turning the washing machine on, it will turn itself off automatically.
This washing machine turns itself off after the washing cycle is complete.
Please note: you cannot tap the power button to turn the washing machine off while a cycle is in progress. You will need to pause the cycle first, then tap the power button to turn the washing machine off
2 Navigation dial
Turn the navigation dial to the left or right to navigate through the cycles and functions. As you turn the navigation dial the screen will display your selection.
3 Start / Pause
Tap and hold to start or pause the current operation.
4 Display
The display shows you information about the current cycle, the estimated time remaining, and will display an information message if a problem occurs.
5 OK Tap to confirm your choice of function or setting.
6Temp.
Tap to change the water temperature for your chosen cycle.
The indicator above the button shows the default or selected setting.
7
Rinse
Tap to change the rinse count for your chosen cycle.
The indicator above the button shows the default or selected setting.
8 Spin
Tap to change the spin speed for your chosen cycle.
The indicator above the button show the default or selected setting.
9 Additional function
Tap to open the additional functions menu.
Tap and hold for 3 seconds to open the system functions menu.
10 Smart Control
Tap to activate or deactivate the Smart Control function.
Tap and hold to enter pairing mode to connect to SmartThings.
When the Smart Control function is active, you can control your washing machine remotely using the SmartThings app on your smartphone or tablet.
