Loading ...
Loading ...
Loading ...
6 English
Tools and Parts
Parts supplied
Removing the packaging
CAUTION
Remove the carton carefully. Wear gloves to protect against sharp edges.
WARNING
Remove the protective lm covering the product before putting into
operation.
• Hood canopy assembly with blower and LED lamps already installed.
• 6” (15.2 cm) round air transition
• Duct covers
• Hardware bag with:
Part Qty Part Qty
5x45 mm
6
5.4x75 mm screws
(for 10x60 mm wall
anchors)
4
8x40 mm
2
Torx 10 adapter
1
3.5x9.5 mm
2
Duct cover bracket
1
4x8 mm
4
Mounting template
1
10 x 60 mm
4
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),
1
⁄8” (3.2 mm), and
1
⁄16” (4,8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips & Torx 20 screwdrive
r
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Dimensions and Clearances
D
C
G
B
A
F
E
NK30K7000WS
NK30K7000WG
NK36K7000WS
NK36K7000WG
A
30”
(76 cm)
36”
(91.2 cm)
B 19
11
⁄16” (50 cm)
C*
max. 39
31
⁄64” (100.3 cm)
min. 25
25
⁄64” (64.5 cm)
D 6” (15.24 cm)
E 10
19
⁄32” (26.9 cm)
F 13
5
⁄64” (33.2 cm)
G 2
23
⁄64” (6 cm)
*For vented installations
Installation Requirements
Installation Requirements
Loading ...
Loading ...
Loading ...