Loading ...
Loading ...
Loading ...
11
Washing Cycle Indicator Lights
The washing cycle
indicator lights pro-
vide information
during the wash
cycle.
The Close Washer
Lid advisory LED
will illuminate if the
washer lid is open.
Fully close the
washer lid before
starting the washer.
The washer will not operate with the lid open.
The Balance Load advisory LED indicator will
illuminate if the wash load is unbalanced in the
drum during the wash cycle. Pause the washer
and redistribute the wash load.
The Cycle Status Lights will illuminate as
each stage of the wash cycle is reached.
Cycle Status Light stages include:
Washing, Rinsing, Spinning and Done.
WASHER OPERATING INSTRUCTIONS
WARNING
HARMFUL VAPOR HAZARD
DO NOT use or mix liquid chlorine bleach
with other household chemicals such
as toilet cleaners, rust removers, acid
or products containing ammonia. These
mixtures can produce dangerous fumes
which can cause serious injury or death.
WARNING
To reduce the risk of re or serious injury to
persons or property, comply with the basic
warnings listed below:
• Read and comply with all instructions on
stain removal products.
• Keep stain removal products in their
original labeled containers and out of
children’s reach.
• DO NOT combine stain removal products,
especially ammonia and chlorine bleach.
Dangerous fumes can result.
• Never wash items which have been
previously cleaned in, washed in, soaked
in or spotted with gasoline, dry cleaning
solvents or other ammable or explosive
substances because they give off vapors
that could ignite or explode.
• Never use highly ammable solvents, such
as gasoline, inside the home. Vapors can
explode on contact with ames or sparks.
Safe Stain Removal Procedures
• Remove stains promptly.
• Follow the recommended treatment in the
stain removal chart on the next page.
• To pretreat stains, use a prewash product,
liquid detergent, or a paste made from
powder detergent and water.
• Use cold water on unknown stains as hot
water can set stains.
• Consult care label instructions for treatments
to avoid on specic fabrics.
• Check for colorfastness by testing stain
remover products on an inside seam.
• Rinse and wash items after stain removal.
Washing Cycle Controls
(Start, Pause, and Cancel)
Start
Press the washer
START|PAUSE button once
to begin the wash cycle. The
unit will emit two short beeps,
the LED will turn solid green,
and the door lid lock will
engage with an audible double
click.
Pause
Press the washer START|PAUSE button
once while the washer is running to pause the
wash cycle. The unit will emit one short beep,
the LED will blink, the wash tub will come to
a complete stop, and the door lid safety lock
will disengage with an audible double click.
The wash tub can take up to 6 minutes to stop
after the START|PAUSE button is pressed.
DO NOT force open the locked lid. Press the
START|PAUSE button again to restart the
wash cycle.
Cancel
Press the washer CANCEL button to cancel
the wash cycle. The unit will emit one long
beep, the wash tub will come to a complete
stop, and the door lid safety lock will disen-
gage with an audible double click. The wash
tub can take up to 6 minutes to stop
after the CANCEL button is pressed. DO
NOT force open the locked lid.
Loading ...
Loading ...
Loading ...