Loading ...
Loading ...
Loading ...
Roof Load
F GAWR
1
GVWDescription
0 lb (0 kg)3,550 lb (1,610 kg)7,720 lb (3,501 kg)ME Expedition 4WD
with and without
moonroof
200 lb (90 kg)3,375 lb (1,530 kg)7,450 lb (3,379 kg)ME Expedition
without moonroof
125 lb (56 kg)3,375 lb (1,530 kg)7,450 lb (3,379 kg)ME Expedition with
moonroof
1
Front Gross Axle Weight Ratio.
Adjusting the Crossbar (If Equipped)
Note: For less wind noise and better
aerodynamics, only install the crossbars
when you need them for carrying cargo. The
front crossbar is fixed. There are two
optional positions for the rear crossbar.
Follow the steps to reposition or remove the
rear crossbar.
E203063
1. Remove the crossbar bolts at both
sides of the rear crossbar by using the
supplied torx tool or a similar tool.
2. Move the crossbar to the new position.
3. Replace and tighten the bolts at both
sides of the crossbar by using the
supplied torx tool or a similar tool.
Note: There may be snap caps in the new
side rail position, which must be removed
before installing the crossbar. These caps
can be removed by using the supplied torx
tool or a similar tool.
LOAD LIMIT
Vehicle Loading - with and
without a Trailer
This section guides you in the
proper loading of your vehicle,
trailer, or both. Keep your loaded
vehicle weight within its design
rating capability, with or without
a trailer. Properly loading your
vehicle provides maximum return
of vehicle design performance.
Before you load your vehicle,
become familiar with the
following terms for determining
your vehicle’s weight rating, with
or without a trailer, from the
vehicle’s Tire and Loading
Information label or Safety
Compliance Certification label.
269
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-
Load Carrying
Loading ...
Loading ...
Loading ...