Loading ...
Loading ...
Loading ...
GEAppliances.com
Cycle Indicator Lights and Sounds
7
7
Start Dishwasher
6
Start
Open door to select the desired options. Press the Start button and close the door within 10 seconds to start
the cycle or begin the Delay Hours countdown. The wash cycle will begin shortly after closing the door. The
display will turn off if the door remains open for two minutes. To activate the display, close and open the door
or press any button.
Interrupt or
Pause
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash cycle to pause.
The dishwasher will beep every minute to remind you to close the door. To restart or resume the cycle, press
Start, and close the door within 10 seconds.
Cancel
To cancel a wash cycle, press and hold the Start button for 3 seconds and close door. The dishwasher will
drain, emit a beep sound, and the wash cycle light will turn OFF.
Sanitized or
Cycle Sanitized
Displayed at end of the cycle when Wash Temp Sani or Sanitize Temp has been selected and dishwasher has
met requirements for sanitization. See Wash Temp Sani or Sanitize Temp, for complete description. Closing
door or pressing any button will turn off light.
Clean or Cycle
Complete
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean. The light
will turn off when the door is opened.
Low Rinse Aid
(on some models)
Displayed when rinse agent is low or empty. See page 8 for Use a Rinse Agent. To turn indicator off, press the
Pre-Soak or Steam button 7 times within 5 seconds. Repeat this process to turn the Low Rinse Aid indicator
back on.
Cycle Status
(on some models)
The indicator light on the door front will change color to indicate the wash status. During the wash cycle, the
indicator light will be amber. When the wash cycle is complete, the light will change to green.
Sounds
The dishwasher will emit a sound to indicate cycle completion, button presses, and door ajar. To mute all
sounds, press the Heated Dry or Power Dry button 7 times within 5 seconds. Repeat this process to turn
sounds back on.
Sabbath/
Door Wake
Up Mode
(on some models)
To turn this option ON/OFF, press and hold the START and WASH TEMP pads for 5 seconds, close the door and wait
3 minutes for the dishwasher to go into sleep mode. In the OFF mode, the control display, control sounds, and
interior lights
(on some models)
will not respond to the door opening/closing. This mode can be used when
observing certain religious holidays such as the Sabbath. To activate the control and interior lights
(on some
models)
, press any pad.
Loading ...
Loading ...
Loading ...