Loading ...
Loading ...
Loading ...
en Appliance door
36
5. Push the intermediate panel downwards in the ‚
area, carefully lift the ƒ holder until it can be pulled
out (Fig. #).
6. Lift the intermediate panel from below (Fig. $) and
remove it.
7. Clean all panels on both sides with glass cleaner
and a soft cloth.
:Warning
Risk of injury!
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, or sharp or
abrasive cleaning aids or detergents.
8. Dry and refit all panels.
Installation
Note: When fitting the door panels, ensure that they are
in the original order.
1. Insert the intermediate panel and push it in the
direction of the arrow until it is fitted in the frame. The
arrow on the intermediate panel must line up with the
arrow on the frame (Fig. !).
2. Push the intermediate panel downwards in the ‚
area, insert the ƒ holder at an angle and push down
until it locks into place (Fig. ").
The holder is inserted (Fig. #).
3. Insert the inner glass into the holder „ on the left and
right (Fig. $).
4. Push the inner glass downwards until it locks into
place (Fig. %).
E
D
1
E
D
2
F
F
Loading ...
Loading ...
Loading ...