Loading ...
Loading ...
Loading ...
2
2. INSTALLATION
2.1 Locaon
When selecng a posion for your unit, please make sure the floor is flat and firm. The room
should be well venlated with an ambient room temperature between 61°F and 100°F. Avoid
locang your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it
may increase the electrical consumpon. Extreme cold temperatures may cause the unit not to
perform properly. This unit is not designed for use in garage or outdoor installaon. Do not drape
the unit with any covering.
Please keep a clearance of 8 inches on both sides, 6 inches in the rear and 8 inches above the unit.
This allows for proper air circulaon around the refrigerator and improves the unit’s cooling
efficiency. The door can be opened to the right or the le, depending on what beer suits the
locaon. Please ensure there is adequate space for the door to fully open.
2.2 Reversing the Door Swing
Tools Required: Phillips style screwdriver / Flat blade screwdriver / Hexagonal spanner
We recommend that 2 people handle the unit for door reversal.
Be sure the unit is unplugged and empty.
Tilt the unit backwards and rest the unit on something solid so that it will not slip. Do not lay
the unit flat on its back as this may damage the coolant system.
Adjust the two leveling feet to their highest posion.
All parts removed must be saved for reinstallaon of the door.
1) Remove the plasc covering from the top door hinge.
2) Unscrew the three screws from the boom bracket.
3) Remove the foot from opposite side.
4) Place to one side.
Loading ...
Loading ...
Loading ...