Loading ...
Loading ...
Loading ...
Registering the
cam
era to your hub
Do not perform this procedure if
you
are using the camera by
itself (i.e., you do not have a
KX-HNB600 hub). Use the initial
setup procedure (page 19).
If you want to integrate your HD
cam
era with a Panasonic Home
Network System, you must
register the camera to the hub.
Registering the camera
Con
firm the following before you
begin.
– Make sure you can use your
mobile device to access the hub
– Make sure the hub’s firmware is
up to date and that you are
using the latest version of the
[Home Network] app.
For more information, refer to
the System Setup Guide
included with your hub and the
User’s Guide (page 31).
1 Plug in the camera and wait
about 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
green, or if you experience
trouble during this
procedure, reset the
camera (page 25) and
the
n repeat this procedure.
2 Start the [Home Network]
app.
3 From the [Home Network]
app home screen, tap
[Settings].
4 Tap [Device Registration] ®
[Registration] ® [HD
Camera] ® [Method 1].
5 When prompted, press the
MSETUPN button on the back
of the camera.
R The camera registers your
mobile device.
R The app’s home screen is
displayed when registration
is complete.
6 Follow the on-screen
instructions. When prompted,
set the password that will be
used to access the camera.
Note:
R When registration is complete,
the hub sounds one long beep.
R If registration fails, the hub
sounds several short beeps.
24
For a
ssistance, please visit http://shop.panasonic.com/support
Setup
HNC800_(en_en)_0902_ver.220.pdf 24 2016/09/05 17:54:31
Loading ...
Loading ...
Loading ...