Loading ...
Loading ...
Loading ...
Programming the Universal Transmitter
NOTE: It is recommended that your hand-held
transmitter contain fresh batteries prior to
programming.
/!\ WARNING
Make sure that people or objects are clear
of the garage door, gate, etc. while you are
programming the system.
To program the Universal Transmitter:
I. Make sure your vehicle's engine is off.
2. Erase the Universal Transmitter's test codes by
holding down the two outside buttons. After
20 seconds the light will begin to flash. Release
both buttons immediately.
3. Choose one of the three Universal
Transmitter buttons to program. Place the
hand-held controller you want to program
within one inch of the Universal Transmitter.
Push and hold both the Universal
Transmitter button you want to program
and the hand-held controller at the same
time. The Universal Transmitter light will
flash slowly.
131
Loading ...
Loading ...
Loading ...