Loading ...
Loading ...
Loading ...
This unit has the following functions:
● Measures terrestrial magnetism and indi-
cates heading direction of vehicle
● Indicates outside air temperature
● Indicates possible frozen road conditions
With the ignition switch in the ON position, press
the mode button as described in the chart below
to activate various features of the compass and
outside temperature display.
Push and hold
the mode button
for about:
Feature:
(Push button again for about 1 sec-
ond to change settings)
1 second
Compass display toggles: °F → °C
→ OFF → °F
5 seconds
Compass zone can be changed to
correct false compass readings
10 seconds Compass enters calibration mode
OUTSIDE TEMPERATURE DISPLAY
Push the mode button
s
1
when the ignition key is
in the ON position to change the display as
follows: °F → °C → OFF → °F.
● If the outside temperature drops below 37°F
(3°C), the display indicates ICE. The display
will continue to indicate ICE until the tem-
perature reaches 41°F (5°C).
● When the outside temperature is between
130°F (55°C) and 158°F (70°C), the display
shows 130°F (55°C).
● When the outside temperature is between
-22°F (-30°C) and -40°F (-40°C), the dis-
play shows -22°F (-30°C).
● When the outside temperature is lower than
-40°F (-40°C) or higher than 158°F (70°C),
the display shows only———though it is
operating. This is not a malfunction.
● The outside temperature sensor is located in
front of the radiator. The sensor may be
affected by road or engine heat, wind direc-
tion and other driving conditions. The display
may differ from the actual outside tempera-
ture or the temperature displayed on various
signs or billboards.
Type A
LIC0659
Type B
LIC0660
COMPASS AND OUTSIDE
TEMPERATURE DISPLAY (if so
equipped)
Instruments and controls 2-9
Z REVIEW COPY—
2006 Titan (tzw)
Owners Manual—USA_English (nna)
05/16/06—debbie
X
Loading ...
Loading ...
Loading ...