Loading ...
Loading ...
Loading ...
If and when220
– Remove the lid with a flat screwdriver, placing it in notch
⇒ page 219, fig. 152.
Changing bulbs
– Remove the bulbholder by pressing the fastening clips
⇒ fig. 153 and pulling outwards.
– Replace the faulty bulb, rotating it to the left and outwards.
– To refit follow the steps in reverse order, taking special care when
fitting the bulb holder.
Side turn signal bulbs
– Press the turn signal to the left or to the right to remove the bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening the
tabs ⇒ fig. 154, and then fit in the bulb as shown by the
arrow ⇒ fig. 154.
A
A
Fig. 153 Removing the
bulbholder
A
B
Fig. 154 Side turn
signals
A
1
A
2
Ibiza ST_EN.book Seite 220 Dienstag, 12. Januar 2010 4:03 16
Loading ...
Loading ...
Loading ...