Loading ...
Loading ...
Loading ...
BEFORE EMBROIDERING
B-46
About the Needle
The needle is probably the most important part of the machine. Choosing the proper needle for your
embroidering project will result in a beautiful finish and fewer problems. Below are some things to keep
in mind about needles.
• Use needle 75/11 for embroidery.
• It is recommended that a 90/14 needle should be used when embroidering on heavyweight fabrics or
stabilizing products (for example, denim, puffy foam, etc.). A 75/11 needle may bend or break, which could
result in injury.
• The smaller the needle number, the finer the needles. As the numbers increase, the needles get thicker.
• Use fine (thinner) needles for lightweight fabrics, and thicker (larger) needles for heavyweight fabrics.
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
BEFORE EMBROIDERING
Step 4
Step 2
Step 1
Step 3, 5
Step 6
Step # Aim Action Page
1 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. B-31
2 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. E-11 to
E-16
3 Pattern selection Turn the main power to ON, and select an embroidery pattern. E-3
4 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. E-17
5 Checking the layout Check and adjust the size and position of the embroidery. E-19
6 Embroidery thread setup Set up embroidery thread according to the pattern. E-21
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
Loading ...
Loading ...
Loading ...