Loading ...
Loading ...
Loading ...
26
REMOVING CLOGS
① ②
③
④
If you notice a loss in suction, first check the filters as described on page 23.
If the filters are clean, There may be a clog. The arrows show areas where
clogs are most likely to occur.
To check for clogs :
① Unplug and turn off the vacuum cleaner.
② Check the hand-held vacuum where it connects to the main body by
pressing the release buttons on the upper body.
③ Check the main body where it connects to the hand-held vacuum while
the hand-held is removed.
④ Remove the dust bin and check the dust bin inlet where it connects to the
main body.
⑤ Turn the vacuum cleaner over, remove the brush (see page 25), and
check the agitator inlet.
WARNING
Electrical shock and personal injury hazard. Always remove the
vacuum cleaner from the charging stand before servicing. Remove the
hand-held vacuum and the battery before servicing to avoid electric
shock or injury.
Loading ...
Loading ...
Loading ...