Loading ...
Loading ...
Loading ...
Servicing Your Honda
174
Brakes
Refer to Safety Precautions on page 109.
1.
Make sure the engine is OFF and the parking brake is set.
2.
Remove the rear brake drain bolt (1) and sealing washer from the
bottom of the rear brake panel.
If any water drains, the brake seals must be replaced by your
dealer as soon as possible.
3.
Install the rear brake drain bolt with a new sealing washer and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
Draining Water from Brakes
RIGHT REAR
(1) rear brake drain bolt
(1)
20 TRX420FA1 FA2-31HR3A600.book 174 ページ ２０１９年４月２５日 木曜日 午後４時４５分
Loading ...
Loading ...
Loading ...