Loading ...
Loading ...
Loading ...
E-14
Preparations for Operation
Movement with casters should be done slowly. The movement is only in sideways direction. (To prevent from falling)
No cleaning effect will be experienced if the fi lter is set without detaching the plastic cover. It will also cause unit failure.
Do not tip over or tilt the unit.
Setting Filter in Unit
Setting procedure is the same with fi lter replacement. (Use only genuine Hitachi Air Purifi er fi lters.)
Remove the filter
1
2
3
Remove the filter from the
unit.
Remove the filter from the
plastic packaging.
Remove rear panel and pre-filter
Place the unit on a flat and stable location.
Remove the pre-filter.
4
Hold the bottom part of the rear panel
(2 locations), pull it out gently, and shift
slightly upward to remove it.
Slide the switch upwards (2 locations)
to release the lock.
Switch
Slide the switch upward.
Pre-filter
Plastic packaging
Filter
Filter
Filter
CAUTION
Install the filter to the unit
Do not put excessive force and deform
the filter.
Set the filter so that you can see the label
CAUTION
EP-NZG70J_EN.indd 14EP-NZG70J_EN.indd 14 6/30/2017 10:32:306/30/2017 10:32:30
Loading ...
Loading ...
Loading ...