Loading ...
Loading ...
Loading ...
and wall should be at least 20mm
Set the desired washing program,after setting,press the Start/Pause Button,and
washing machine begin to run. Then hold the Progress Button and Delay Botton at
the same time for more than 3 seconds you will hear three beep sound digital tub
display “CL”,and the child lock will activate.All of the Bottons are locked and will no
function.
the
Progress Button and Delay Botton
at the same time for more than 3 seconds
Child Lock
the child Lock
the child Lock
child Lock
after three beep
The energy test program was performed using the "Cotton"
cycle default setting of:
Soak "30"Min
Water Temp Warm
Rinse:1 Rinse
Spin:7 Min
Water level:Max.
Please use low suds/high efficiency detergent.
Note:
This washer has a 2-step water fill to achieve the required water level and temperature
for the best cleaning result.
First Fill - Once options and cycle are selected and the START/PAUSE BUTTON is
pressed, both hot and cold water will flow into the inner tub. The warm water
temperature helps to dissolve detergent quickly. The washing operation starts at the
end of the hot water fill and is followed by a 5-minute (approximately) soak-agitation
session to help the detergent mix completely with the laundry.
Second Fill - The second fill is in order to reach the selected water level and make
the clothes completely soaked in water to achieve a better wash effect.
Loading ...
Loading ...
Loading ...