Loading ...
Loading ...
Loading ...
5
EN
Installing the Hob
Important: Be sure the new appliance is installed and grounded only by qualied
personnel.
Please observe this instruction. The warranty will not cover any damage that may
occur as a result of improper installation.
Technical data is provided at the end of this manual.
Safety instructions for the installer
• A device must be provided in the electrical installation that allows the appliance to be discon-
nected from the mains at all poles with a contact opening width of at least 3 mm. Suitable
isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed
from the holder), earth leakage trips and contactors.
•
This type of
appliance may be installed with a high cupboard or wall on one side.
•
The installation must guarantee shock protection.
•
68930.
• For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.
•
grout.
•
• Ensure that the seal is correctly seated against the work surface without any gaps. Additional
•
The hob must be pressed out from below when removed.
C Top_MID] C61RAAST_XEU-00031A-03_EN.indd 5 26/10/2555 14:46:16
Loading ...
Loading ...
Loading ...