Loading ...
Loading ...
Loading ...
17
Quick Start
1 After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”. See page 45.)
2
Follow the steps in the Setup Guide and adjust the focus and height (angle).
3 After adjusting the focus and height (angle), press ENTER to fi nish the Setup Guide.
4. Adjust the projected image with the Setup Guide
_PP. 27, 28
Correcting trapezoidal distortion using Keystone Correction.
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
5. Correct trapezoidal distortion
_P. 29
Select the “COMPUTER” using INPUT on the projector or COMPUTER on the remote
control.
On the
projector
On the remote
control
INPUT list
INPUT
COMPUTER
DVI-D Computer
D
DVI-D Video
D
On-screen display (RGB)
RGB
1024 × 768
COMPUTER
When you press INPUT on the projector, the INPUT list appears.
Press '/" to switch the INPUT mode.
•
6. Select the INPUT mode
_P. 30
7. Turn the computer on
Press STANDBY/ON on the projector or STANDBY on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
standby mode.
On-screen display
On the
projector
On the remote
control
8. Turn the power off
_P. 26
Loading ...
Loading ...
Loading ...