Loading ...
Loading ...
Loading ...
Opening and closing
24
The sliding visor:
> opens together with the roof or
> opens slightly and the roof is lifted into a
raised position
With a closed or lifted roof, the sliding visor can
be independently opened or closed.
For convenience operation using the remote
control or the door lock, refer to page 20 or 21.
Ventilation setting
Press the switch:
the roof is raised and the sliding visor is opened
slightly.
After switching off ignition
You can operate the panorama glass sunroof for
approx. 1 minute as long as no door has been
opened.
Automatic opening and closing
Press the switch past the resistance point.
Pressing the switch again stops the motion.
Opening and closing sunroof and
sliding visor together
Briefly press the switch past the resistance
point twice consecutively.
Pressing the switch again stops the motion.
Comfort position
Each time the panorama glass sunroof is com-
pletely opened and subsequently closed, it
stops in the comfort position. If you wish, you
can resume the motion by activating the switch.
In the comfort position, the wind noise in the
interior is reduced.
Pinch protection system
If the panorama glass sunroof or sliding visor
encounter resistance when closing from
roughly one third of the roof opening or when
closing from the raised position, the closing
action is interrupted and the panorama glass
sunroof and sliding visor reopen a little.
Despite the presence of the pinch protec-
tion system, inspect the sunroof's travel
path prior to closing it, as the safety system
might fail to detect certain kinds of obstruc-
tions, such as very thin objects, and the sunroof
would continue closing.<
Closing without pinch protection
system
When there is danger outside, press the switch
beyond the resistance point and hold it there.
The sunroof will close without the pinch protec-
tion system.
Following interruptions in electrical
power supply
After a power supply interruption, it may only be
possible to raise the sunroof. The system must
be initialized. BMW recommends having this
work carried out by your BMW Sports Activity
Vehicle Center.
Moving manually
In the event of an electrical malfunction, you can
move the sunroof manually.
1. Pull the cover firmly downward to remove.
2. Take the Allen wrench from the compart-
ment under cargo area floor, refer to
page 108, and insert it into the opening pro-
vided. Move the sunroof into the desired
position. The arrow in the illustration indi-
Online Edition for Part no. 01 41 0 012 863 - © 07/06 BMW AG
Loading ...
Loading ...
Loading ...